Installation Instructions for Hot Fix W19003

Linux for x64


Hot fix W19003 addresses the issue(s) in SAS Size Optimization 3.4 as documented in the Issue(s) Addressed section of the hot fix download page:

http://ftp.sas.com/techsup/download/hotfix/HF2/W19.html#W19003


W19003 is a "container" hot fix that contains the following "member" hot fixes which will update the software components as needed.

W23003  updates  SAS Merchandise Intelligence Client 5.4
W24003  updates  SAS Merchandise Intelligence Mid-Tier 5.4
W22003  updates  SAS Merchandise Intelligence Plug-in for SAS Management Console 5.4
W20003  updates  SAS Merchandise Intelligence Workbench Server 5.4
W21003  updates  SAS Merchandise Solutions Configuration Workbench 5.4
Y07001  updates  SAS Size Profiling Server 3.4

See What is a container hot fix? in the Hot Fix FAQ for more information about container hot fixes.


Before applying this hot fix, follow the instructions in SAS Note 35968 to generate a SAS Deployment Registry report, then verify that the appropriate product releases are installed on your system. The release number information in the Registry report should match the 'member' release number information provided above for the software components installed on each machine in your deployment.

The hot fix downloaded, W19003pt.zip, includes the updates required for all components listed above on all applicable operating systems. To apply this hot fix on multiple machines, you can either save W19003pt.zip on each machine or save it in a network location that is accessible to all machines.

Do NOT extract the contents of W19003pt.zip. The hot fix installation process will extract the contents as needed.


IMPORTANT NOTES

  1. Files delivered in this hot fix will be backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

  2. You must have Administrator Privileges on your CLIENT or SERVER machine.

  3. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix.

  4. This hot fix should be installed using the same userid who performed the initial software installation.

  5. CONFIGURATION: No automatic configuration scripting is required for this hot fix. If you have previously configured software installed, the SAS Deployment Manager may present a screen where you will see "Apply SAS Hot Fixes" and "Configure SAS Hot Fixes" options. On this screen, you must ensure that the "Configure SAS Hot Fix" option is *not* selected. If this option is automatically selected, please de-select it prior to proceeding with the SAS Deployment Manager Screens. Failure to do so could have unintended consequences when applying this hot fix.

  6. You must deploy the hot fix in the following timeframe


INSTALLATION

Hot Fix W19003 must be installed on each machine where the updated components of the product, listed above, are installed. During the installation process you may see references to all operating systems for which updates are provided in the hot fix. The installation process will determine the operating system and which component(s) of SAS Size Optimization 3.4 require updating on the machine. See SAS Note 44810 for more details.

The hot fix will be applied using the SAS Deployment Manager. By default, the SAS Deployment Manager will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory.

After downloading W19003pt.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

Please review the CONFIGURATION Important Note above concerning proper selection of the "Configure SAS Hot Fix" option in the SAS Deployment Manager.


The hot fix installation process generates the log file

<!SASHOME>/InstallMisc/InstallLogs/IT_date-and-time-stamp.log
for example, IT_2011-10-31-13.18.21.log. Each attempt to apply a hot fix results in the creation of a new log file giving detailed information regarding the installation process.

Postexec log files are created after the installation is completed and identifies the files that were added, backed up, changed and removed. These log files include the ‘member’ hot fix id in the name of the file and are also written to the <!SASHOME>/InstallMisc/InstallLogs directory. There is one postexec log for each ‘member’ hot fix applied (member hot fixes are listed at the top of these instructions).


The content of this hot fix is listed in the hot fix manifest.


POST-INSTALLATION INSTRUCTIONS

For each product installed, click the link to be redirected to post-installation instructions.

W23003  updates  SAS Merchandise Intelligence Client 5.4
W24003  updates  SAS Merchandise Intelligence Mid-Tier 5.4
W22003  updates  SAS Merchandise Intelligence Plug-in for SAS Management Console 5.4
W20003  updates  SAS Merchandise Intelligence Workbench Server 5.4
W21003  updates  SAS Merchandise Solutions Configuration Workbench 5.4
Y07001  updates  SAS Size Profiling Server 3.4


W23003  updates  SAS Merchandise Intelligence Client 5.4
W21003  updates  SAS Merchandise Solutions Configuration Workbench 5.4

Security Update for SAS Merchandise Intelligence Client 5.4 and SAS Merchandise Solutions Configuration Workbench 5.4

If the updates for the Java Deserialization Vulnerability documented at http://support.sas.com/security/Java-deserialization.html were applied to your system, you must rerun the updateclientconfig tool delivered as part of the vulnerability update. If previously run on your system, you will find this tool in the following locations
/SASMerchandiseSolutionsConfigurationWorkbench/5.4/hotfix
/SASMerchandiseIntelligenceClient/5.4/hotfix

To rerun this tool:

  1. Navigate to /SASMerchandiseSolutionsConfigurationWorkbench/5.4/hotfix OR /SASMerchandiseIntelligenceClient/5.4/hotfix.

    The tool can be executed from either of these locations. It only needs to be run one time on each machine where these components are installed.

    • On Unix systems: execute the following command
      chmod 775 *
    • Execute the following command:

      Unix:

      updateclientconfig.sh <SASHome>
      where <SASHome> is the full path to SASHome

      Windows:

      updateclientconfig.bat
      Note: On some Windows operating systems, you might have to use the option to Run as administrator

      The batch tool prompts you for the SASHome location.


W24003  updates  SAS Merchandise Intelligence Mid-Tier 5.4

Re-build Web Application

In order for this step to execute correctly, the Metadata Server must be running.

1. Invoke the SAS Deployment Manager 9.4

From the SASDeploymentManager directory launch sasdm.sh.
SAS Deployment Manager is installed in the following default location:

<SASHOME>/SASDeploymentManager/9.4

2. Select a language in the Choose Language box

3. Select Rebuild Web Applications

4. Select Configuration Directory or Enter the Configuration Directory and Level that needs to be updated

5. Specify Connection Information, including the sasadm User ID and Password

6. Select SAS Merchandise Intelligence Mid-Tier 5.4 as the Web Application to Rebuild

7. Verify the information on the Summary screen and select Start

8. Select Finish when the deployment is complete

This process will update the SAS Merchandise Intelligence Mid-Tier 5.4 ear in

<SASCONFIGDIR>/Web/Staging
A backup of the original ear file will be placed in the directory
<SASCONFIGDIR>/Web/Staging/Backup

9. Exit the SAS Deployment Manager 9.4


Re-deploy Web Application

1. Restart all SAS sessions, daemons, spawners and servers.

2. Invoke the SAS Deployment Manager 9.4

From the SASDeploymentManager directory launch sasdm.sh.
SAS Deployment Manager is installed in the following default location:

<SASHOME>/SASDeploymentManager/9.4

3. Select a language in the Choose Language box

4. Select Deploy Web Applications

5. Select Configuration Directory or Enter the Configuration Directory and Level that needs to be updated

6. Specify Connection Information, including the sasadm User ID and Password

7. Check the Allow the application server to stop checkbox

8. Select SAS Merchandise Intelligence Mid-Tier 5.4 as the Web Application to Deploy

9. Verify the information on the Summary screen and select Start

10. Select Finish and exit the SAS Deployment Manager when the deployment is complete



W22003  updates  SAS Merchandise Intelligence Plug-in for SAS Management Console 5.4

NONE


W20003  updates  SAS Merchandise Intelligence Workbench Server 5.4

NONE


Y07001  updates  SAS Size Profiling Server 3.4

NONE


After completing all of the post-install sections above, run your weekly ETL and back-end jobs.


This completes the installation of hot fix W19003 on Linux for x64.


Copyright 2015 SAS Institute Inc. All Rights Reserved.