#
# The text in the grdcctlsvr.txt file and the text in the grdcctlsvro.txt file should be
# identical. The names of the errors_grdcctlsvr*.txt properties will change
# between the files but all the rest should be the same.
#

errors_grdcctlsvro_intro.txt=                                                                            ${line.separator}\
 <h3>SAS Grid Manager Control Server failed to deploy successfully</h3>                                  ${line.separator}\

errors_grdcctlsvro_general.txt=                                                                          ${line.separator}\
 <p>More information about this error can be found in the log file.                                      ${line.separator}\
    <ul>                                                                                                 ${line.separator}\
      <li>Error log file: <a href="${error.logfile}"                                                     ${line.separator}\
                           type="text/plain" target="_blank">${error.logfile}</a></li>                   ${line.separator}\
    </ul>                                                                                                ${line.separator}\
 </p>                                                                                                    ${line.separator}\

errors_grdcctlsvro_backup.txt=                                                                           ${line.separator}\
 <p>Backup of files in both both ${error.srcdir} and ${error.deploydir} failed.                          ${line.separator}\
    The directory may be read only, the directory may not exist, or                                      ${line.separator}\
    the permissions are insufficient for this process.                                                   ${line.separator}\
    <ul>                                                                                                 ${line.separator}\
      <li>Error log file: <a href="${error.logfile}"                                                     ${line.separator}\
                           type="text/plain" target="_blank">${error.logfile}</a></li>                   ${line.separator}\
    </ul>                                                                                                ${line.separator}\
 </p>                                                                                                    ${line.separator}\

errors_grdcctlsvro_moveOrigFiles.txt=                                                                    ${line.separator}\
 <p>Copying and configuring of files from ${error.srcdir} to ${error.deploydir} failed.                  ${line.separator}\
    <ul>                                                                                                 ${line.separator}\
      <li>Error log file: <a href="${error.logfile}"                                                     ${line.separator}\
                           type="text/plain" target="_blank">${error.logfile}</a></li>                   ${line.separator}\
    </ul>                                                                                                ${line.separator}\
 </p>                                                                                                    ${line.separator}\

errors_grdcctlsvro_loadMetadata.txt=                                                                     ${line.separator}\
 <p>Information about the Logical Grid Server or Grid Monitoring Server                                  ${line.separator}\
    could not be loaded to the Metadata server.                                                          ${line.separator}\
    <ul>                                                                                                 ${line.separator}\
      <li>Error log file: <a href="${error.logfile}"                                                     ${line.separator}\
                           type="text/plain" target="_blank">${error.logfile}</a></li>                   ${line.separator}\
    </ul>                                                                                                ${line.separator}\
 </p>                                                                                                    ${line.separator}\



instructions_sasappservers_grdcctlsvr_head.txt=                                                          ${line.separator}\
  <h3>SAS Logical Grid Server</h3>                                                                       ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_head.txt=                                            ${line.separator}\
  <table class="detailTable" border=0 cellPadding=0 cellSpacing=0>                                       ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_host.txt=                                            ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Host machine</td>                                                          ${line.separator}\
      <td class="detailContent">${server.grdcctlsvr.host}</td>                                           ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_port.txt=                                            ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Port</td>                                                                  ${line.separator}\
      <td class="detailContent">${server.grdcctlsvr.port}&nbsp;&nbsp;&nbsp;(0 = use default port)</td>   ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_shared_dir.txt=                                      ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Shared Directory</td>                                                      ${line.separator}\
      <td class="detailContent">${server.grdcctlsvr.shared.dir.path}</td>                                ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_mpi_path.txt=                                        ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">MPI Directory</td>                                                         ${line.separator}\
      <td class="detailContent">${server.grdcctlsvr.mpi.path}</td>                                       ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_migrate_begin.txt=                                   ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Servers migrated</td>                                                      ${line.separator}\
      <td class="detailContent">The following SAS Application Server(s) had their logical                ${line.separator}\
                                grid server migrated to this host:<p><ul>                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_migrate_end.txt=                                     ${line.separator}\
                                </ul></p></td>                                                           ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_validation_lsf.txt=                                  ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Validation steps</td>                                                      ${line.separator}\
      <td class="detailContent">                                                                         ${line.separator}\
        <ol>                                                                                             ${line.separator}\
          <li>Make sure the grid administrator has reconfigured the grid by issuing the                  ${line.separator}\
              <b>lsadmin reconfig</b> and <b>badmin reconfig</b> commands to pick up the changes         ${line.separator}\
              made to the grid configuration by the SAS Deployment Wizard.</li>                          ${line.separator}\
          <li>In the SAS Management Console, on the Plug-ins tab, select "+" to expand the               ${line.separator}\
              Server Manager node.</li>                                                                  ${line.separator}\
          <li>Expand the SAS Application Server associated with the grid you want to validate.</li>      ${line.separator}\
          <li>Highlight the Logical Workspace Server for the SAS Application Server.</li>                ${line.separator}\
          <li>Right mouse click this server and select Validate (you can enter the SAS                   ${line.separator}\
              Spawned Servers account for the user ID). You should see a Validation Successful           ${line.separator}\
              message.</li>                                                                              ${line.separator}\
          <li>Expand the Logical Grid Server for the SAS Application Server.</li>                        ${line.separator}\
          <li>Highlight the Grid Server under Logical Grid Server.</li>                                  ${line.separator}\
          <li>Right mouse click this server and select Validate (you can enter the SAS                   ${line.separator}\
              Spawned Servers account for the user ID). You should see a Validation Successful           ${line.separator}\
              message.</li>                                                                              ${line.separator}\
        </ol>                                                                                            ${line.separator}\
      </td>                                                                                              ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_validation_other.txt=                                ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Validation steps</td>                                                      ${line.separator}\
      <td class="detailContent">                                                                         ${line.separator}\
        <ol>                                                                                             ${line.separator}\
          <li>In the SAS Management Console, on the Plug-ins tab, select "+" to expand the               ${line.separator}\
              Server Manager node.</li>                                                                  ${line.separator}\
          <li>Expand the SAS Application Server associated with the grid you want to validate.</li>      ${line.separator}\
          <li>Highlight the Logical Workspace Server for the SAS Application Server.</li>                ${line.separator}\
          <li>Right mouse click this server and select Validate (you can enter the SAS                   ${line.separator}\
              Spawned Servers account for the user ID). You should see a Validation Successful           ${line.separator}\
              message.</li>                                                                              ${line.separator}\
          <li>Expand the Logical Grid Server for the SAS Application Server.</li>                        ${line.separator}\
          <li>Highlight the Grid Server under Logical Grid Server.</li>                                  ${line.separator}\
          <li>Right mouse click this server and select Validate (you can enter the SAS                   ${line.separator}\
              Spawned Servers account for the user ID). You should see a Validation Successful           ${line.separator}\
              message.</li>                                                                              ${line.separator}\
        </ol>                                                                                            ${line.separator}\
        Run the <a href="http://support.sas.com/rnd/scalability/grid/gridfunc.html#testprog">            ${line.separator}\
        Sample Program to Verify Grid Environment Setup</a>                                              ${line.separator}\
        to make sure SAS can sign-on to remote servers on the grid nodes that have                       ${line.separator}\
        been configured.                                                                                 ${line.separator}\
      </td>                                                                                              ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_sasappservers_grdcctlsvr_details_table_tail.txt=                                            ${line.separator}\
  </table>                                                                                               ${line.separator}\



instructions_grdcmonsvr_head.txt=                                                                        ${line.separator}\
  <h2>SAS Grid Monitoring Server</h2>                                                                    ${line.separator}\

instructions_grdcmonsvr_details_table_head.txt=                                                          ${line.separator}\
  <table class="detailTable" border=0 cellPadding=0 cellSpacing=0>                                       ${line.separator}\

instructions_grdcmonsvr_details_table_host.txt=                                                          ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Host machine</td>                                                          ${line.separator}\
      <td class="detailContent">${server.grdcmonsvr.host}</td>                                           ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_grdcmonsvr_details_table_port.txt=                                                          ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Port</td>                                                                  ${line.separator}\
      <td class="detailContent">${server.grdcmonsvr.port}&nbsp;&nbsp;&nbsp;(0 = use default port)</td>   ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_grdcmonsvr_details_table_migrate_begin.txt=                                                 ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Servers migrated</td>                                                      ${line.separator}\
      <td class="detailContent">The following SAS Grid Monitoring Server(s) were migrated                ${line.separator}\
                                to this host:<p><ul>                                                     ${line.separator}\

instructions_grdcmonsvr_details_table_migrate_end.txt=                                                   ${line.separator}\
                                </ul></p></td>                                                           ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_grdcmonsvr_details_table_validation.txt=                                                    ${line.separator}\
    <tr>                                                                                                 ${line.separator}\
      <td class="detailLabel">Validation steps</td>                                                      ${line.separator}\
      <td class="detailContent">                                                                         ${line.separator}\
        <ol>                                                                                             ${line.separator}\
          <li>Start the SAS Management Console and log into the metadata server.                         ${line.separator}\
          <li>On the Plug-ins tab, select "+" next to <b>Grid Manager</b> to list                        ${line.separator}\
              the grid monitoring servers.</li>                                                          ${line.separator}\
          <li>Select the "+" next to the grid monitoring server to expand its information list.</li>     ${line.separator}\
          <li>Click on the Host Information tab, enter the username and password required for the        ${line.separator}\
              domain where the Grid Control Server is running and you should see host information        ${line.separator}\
              for every grid node in your grid.</li>                                                     ${line.separator}\
        </ol>                                                                                            ${line.separator}\
      </td>                                                                                              ${line.separator}\
    </tr>                                                                                                ${line.separator}\

instructions_grdcmonsvr_details_table_tail.txt=                                                          ${line.separator}\
  </table>                                                                                               ${line.separator}\


instructions_updating_grdcctlsvr_head.txt=                                                               ${line.separator}\
 <h2><a name="GridConfiguration">Updating Your Grid Configuration</a></h2>                               ${line.separator}\

instructions_updating_grdcctlsvr_lsf.txt=                                                                ${line.separator}\
 <p>You must add the name of the SAS Application Server context                                          ${line.separator}\
 (<b>${oma.appserver.servercontext.name}</b>) as a resource name to the <b>lsf.shared</b>                ${line.separator}\
 configuration file and add that resource name to the list of resources for each host in the             ${line.separator}\
 <b>lsf.cluster.</b><i>&lt;cluster_name&gt;</i> configuration file.                                      ${line.separator}\
 If you have LSF version 7.02 or greater and write access to the LSF configuration directory,            ${line.separator}\
 you can execute the following command:</p>                                                              ${line.separator}\
 <p><b>addresource -r ${oma.appserver.servercontext.name} -m ${os.localhost.host.name}</b></p>           ${line.separator}\
 <p><b>addresource</b> can be found in the path specified by the <b>${grdcctlsvr.lsf.dir}</b>            ${line.separator}\
 environment variable.</p>                                                                               ${line.separator}\
 <p>The grid administrator must issue reconfig commands on the grid after new resources are added.       ${line.separator}\
 The required commands are <b>lsadmin reconfig</b> and <b>badmin reconfig</b>.</p>                       ${line.separator}\
 <p>Additional information about configuring grid resources can be found in the book                     ${line.separator}\
 <a href="http://support.sas.com/documentation/onlinedoc/gridmgr/index.html">                            ${line.separator}\
 Grid Computing in SAS&reg; 9.3</a> on the SAS Support website under topic                               ${line.separator}\
 "Defining and Specifying Resources" in the section entitled "Managing the Grid".</p>                    ${line.separator}\

instructions_updating_grdcctlsvr_migration_before.txt=                                                   ${line.separator}\
 <p>The following SAS Application Servers were migrated:<ul>  

instructions_updating_grdcctlsvr_migration_after.txt=                                                    ${line.separator}\
 </ul>

instructions_updating_grdcctlsvr_lsf_migration.txt=                                                      ${line.separator}\
 <p>You may need to add the name(s) of the migrated SAS Application Server context(s) as a               ${line.separator}\
 resource name to the <b>lsf.shared</b> configuration file and add that resource name to                 ${line.separator}\
 the list of resources for each host in the                                                              ${line.separator}\
 <b>lsf.cluster.</b><i>&lt;cluster_name&gt;</i> configuration file.                                      ${line.separator}\
 If you have LSF version 7.02 or greater and write access to the LSF configuration directory,            ${line.separator}\
 you can execute the following command:</p>                                                              ${line.separator}\
 <p><b>addresource -r </b><i>&lt;name_of_SAS_Application_Server&gt;</i><b> -m                            ${line.separator}\
                                                                      ${os.localhost.host.name}</b></p>  ${line.separator}\
 <p><b>addresource</b> can be found in the path specified by the <b>${grdcctlsvr.lsf.dir}</b>            ${line.separator}\
 environment variable.</p>                                                                               ${line.separator}\
 <p>The grid administrator must issue reconfig commands on the grid after new resources are added.       ${line.separator}\
 The required commands are <b>lsadmin reconfig</b> and <b>badmin reconfig</b>.</p>                       ${line.separator}\
 <p>Additional information about configuring grid resources can be found in the book                     ${line.separator}\
 <a href="http://support.sas.com/documentation/onlinedoc/gridmgr/index.html">                            ${line.separator}\
 Grid Computing in SAS&reg; 9.3</a> on the SAS Support website under topic                               ${line.separator}\
 "Defining and Specifying Resources" in the section entitled "Managing the Grid".</p>                    ${line.separator}\

instructions_updating_grdcctlsvr_other.txt=<p>                                                           ${line.separator}\
 <p>You must make sure you update the grid configuration to add the name of the SAS Application          ${line.separator}\
 Server context (<b>${oma.appserver.servercontext.name}</b>) as a resource name for each                 ${line.separator}\
 host in the grid. Also, Foundation SAS and SAS Management Console may need to know where the            ${line.separator}\
 grid provider's JAR files are located to operate properly.</p>                                          ${line.separator}\
 <p>Instructions on how to complete these tasks for a specific grid provider                             ${line.separator}\
 can be found at <a href="http://support.sas.com/rnd/scalability/grid/gridinstall.html">                 ${line.separator}\
 Installing and Configuring a SAS Grid Environment</a> on the SAS Scalability & Performance              ${line.separator}\
 Support Community.</p>                                                                                  ${line.separator}\


warnings_grdcctlsvr_missing_lsf_profile_file.txt= <li><b>WARNING:</b>                                    ${line.separator}\
 The Platform LSF profile file (<b>$LSF_ENVDIR/profile.lsf</b>)                                          ${line.separator}\
 could not be found to add to the SAS Configuration level environment script file (<b>level_env.sh</b>). ${line.separator}\
 This may be because the LSF_ENVDIR variable is not set or the file is not in the directory specified by ${line.separator}\
 LSF_ENVDIR. You must source the profile.lsf file in the level_env.sh script file so that                ${line.separator}\
 SAS Application Servers can use the grid.

warnings_grdcctlsvr_updatelsf_missing_pgm.txt= <li><b>WARNING:</b>                                       ${line.separator}\
 The Platform LSF configuration update utility could not be found to add the name of the SAS             ${line.separator}\
 Application Server context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files. ${line.separator}\
 This may be because the ${grdcctlsvr.lsf.dir} variable is not set or                                    ${line.separator}\
 you are not using version 7.02 or greater of Platform LSF.                                              ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_env.txt= <li><b>WARNING:</b>                                           ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the EGO_CONFDIR or LSF_ENVDIR are not set properly.                                                     ${line.separator}\
 <ul>                                                                                                    ${line.separator}\
 <li>If running Windows, make sure you have rebooted your machine after installing Platform LSF so that  ${line.separator}\
 the LSF environment variables are set correctly.</li>                                                   ${line.separator}\
 <li>If running Unix, make sure you have sourced the profile.lsf file located in the $LSF_TOP/conf       ${line.separator}\
 subdirectory.</li>                                                                                      ${line.separator}\
 </ul>                                                                                                   ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_resname.txt= <li><b>WARNING:</b>                                       ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the name of the SAS Application Server context is an invalid resource name.                             ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_hostname.txt= <li><b>WARNING:</b>                                      ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the host name was invalid.                                                                              ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_args.txt= <li><b>WARNING:</b>                                          ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the command arguments were not recognized.                                                              ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_open_shared.txt= <li><b>WARNING:</b>                                       ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 it could not open up the <b>lsf.shared</b> file.                                                        ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_open_cluster.txt= <li><b>WARNING:</b>                                      ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 it could not open up the <b>lsf.cluster.</b><i>&lt;cluster_name&gt;</i> file.                           ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_shared_format.txt= <li><b>WARNING:</b>                                 ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the format of the <b>lsf.shared</b> file is not valid.                                                  ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_no_cluster_name.txt= <li><b>WARNING:</b>                                   ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the name of the cluster is not defined in the <b>lsf.shared</b> file.                                   ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_res_exists.txt= <li><b>WARNING:</b>                                        ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the SAS aaplication server name exists already as a non-Boolean resource value.                         ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_cluster_format.txt= <li><b>WARNING:</b>                                ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the format of the <b>lsf.cluster.</b><i>&lt;cluster_name&gt;</i> file is not valid.                     ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_missing_host.txt= <li><b>WARNING:</b>                                      ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the host name of this machine is not found in the <b>lsf.cluster.</b><i>&lt;cluster_name&gt;</i> file.  ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_backup.txt= <li><b>WARNING:</b>                                        ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the program could not backup the existing configuration file.                                           ${line.separator}\
 Make sure you have read/write access to the LSF cluster file on the shared directory.                   ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_rename.txt= <li><b>WARNING:</b>                                        ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the program could not rename the existing configuration file.                                           ${line.separator}\
 Make sure you have read/write access to the LSF cluster file on the shared directory.                   ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

warnings_grdcctlsvr_updatelsf_bad_update.txt= <li><b>WARNING:</b>                                        ${line.separator}\
 The Platform LSF configuration update utility could not add the name of the SAS Application Server      ${line.separator}\
 context (<b>${oma.appserver.servercontext.name}</b>) to the LSF configuration files because             ${line.separator}\
 the program could not update the existing configuration file.                                           ${line.separator}\
 Make sure you have read/write access to the LSF cluster file on the shared directory.                   ${line.separator}\
 Follow the instructions in the                                                                          ${line.separator}\
 <a href="#GridConfiguration">Updating Your Grid Configuration</a>                                       ${line.separator}\
 section to add the name of the SAS Application Server context manually.                                 ${line.separator}\
 </li>

grdcctlsvr.migration.metadata.server.info.txt=             Checking for connection {0} in metadata server {1}({2})
grdcctlsvr.migration.checking.repository.name.txt=         Checking repository name         = {0}
grdcctlsvr.migration.updating.grid.monitoring.server.txt=  Updating grid monitoring server  =  {0}
grdcctlsvr.migration.bypassing.grid.monitoring.server.txt= Bypassing grid monitoring server =  {0}
grdcctlsvr.migration.updating.server.context.txt=          Updating server context          =  {0}
grdcctlsvr.migration.bypassing.server.context.txt=         Bypassing server context         =  {0}
grdcctlsvr.migration.updating.server.component.txt=        Updating server component        =   {0}
grdcctlsvr.migration.updating.logical.server.txt=          Updating logical server          =   {0}
grdcctlsvr.migration.updating.tcpip.connection.txt=        Updating tcpip connection        =   {0}
grdcctlsvr.migration.exception.txt=                        An exception occurred while updating metadata: {0}

grdcctlsvr.migration.server.using.port.txt=                <li>{0} using port {1}</li>

grdcctlsvr.migration.server.txt=                           <li>{0}</li>


unconfiguration_grdcctlsvr_summary_head.txt=<h3>SAS Grid Manager Control Server</h3>                     ${line.separator}\

unconfiguration_grdcctlsvr_summary_intro.txt=<p>The Grid Manager Control Server was removed.</p>         ${line.separator}\
   <ul>                                                                                                  ${line.separator}\

unconfiguration_grdcctlsvr_summary_lgs.txt=                                                              ${line.separator}\
      <li>${grdcctlsvr.logicalserver.name} was removed from metadata.</li>                               ${line.separator}\

unconfiguration_grdcctlsvr_summary_gms.txt=                                                              ${line.separator}\
      <li>${grdcmonsvr.display.name} was removed from metadata.</li>                                     ${line.separator}\

unconfiguration_grdcctlsvr_summary_files.txt=                                                            ${line.separator}\
      <li>Files were deleted from ${grdcctlsvr.config.dir}.</li>                                         ${line.separator}\

unconfiguration_grdcctlsvr_summary_tail.txt=                                                             ${line.separator}\
   </ul>



changeHost_grdcctlsvr_manual_head.txt=                                                                   ${line.separator}\
   <h4>Manual Instructions for SAS Grid Manager Control Server</h4><ul>                                  ${line.separator}\

changeHost_grdcctlsvr_manual_item_resources_head.txt=                                                    ${line.separator}\
   <li>                                                                                                  ${line.separator}\
     If the host <b>${new.host.name}</b> was not previously a part of the grid, you must add the name(s) ${line.separator}\
     of the SAS Application Server context(s) associated with the host <b>${old.host.name}</b> as        ${line.separator}\
     resource name(s) to the host <b>${new.host.name}</b>.                                               ${line.separator}\

changeHost_grdcctlsvr_manual_item_resources_lsf.txt=                                                     ${line.separator}\
     <p>If you have LSF version 7.02 or greater and write access to the LSF configuration directory,     ${line.separator}\
     you can execute the following command:</p>                                                          ${line.separator}\
     <p><b>addresource -r &lt;<i>name_of_SAS_Application_Server</i>&gt; -m ${new.host.name}</b></p>      ${line.separator}\
     <p><b>addresource</b> can be found in the path specified by the <b>${grdcctlsvr.lsf.dir}</b>        ${line.separator}\
     environment variable.</p>                                                                           ${line.separator}\
     <p>The grid administrator must issue reconfig commands on the grid after new resources are added.   ${line.separator}\
     The required commands are <b>lsadmin reconfig</b> and <b>badmin reconfig</b>.</p>                   ${line.separator}\
     <p>Additional information about configuring grid resources can be found in the book                 ${line.separator}\
     <a href="http://support.sas.com/documentation/onlinedoc/gridmgr/index.html">                        ${line.separator}\
     Grid Computing in SAS&reg; 9.3</a> on the SAS Support website under topic                           ${line.separator}\
     "Defining and Specifying Resources" in the section entitled "Managing the Grid".</p>                ${line.separator}\

changeHost_grdcctlsvr_manual_item_resources_other.txt=                                                   ${line.separator}\
     <p>Instructions on how to complete this task                                                        ${line.separator}\
     can be found at <a href="http://support.sas.com/rnd/scalability/grid/gridinstall.html">             ${line.separator}\
     Installing and Configuring a SAS Grid Environment</a> on the SAS Scalability & Performance          ${line.separator}\
     Support Community.</p>                                                                              ${line.separator}\

changeHost_grdcctlsvr_manual_item_resources_tail.txt=                                                    ${line.separator}\
   </li>

changeHost_grdcctlsvr_manual_item_lsf_remove_host.txt=                                                   ${line.separator}\
   <li>                                                                                                  ${line.separator}\
     If the host <b>${old.host.name}</b> is no longer a part of the grid, be sure to remove it           ${line.separator}\
     from the <tt>lsf.cluster.&lt;<i>cluster</i>&gt;</tt> file in the directory specified by the         ${line.separator}\
     <tt>LSF_ENVDIR</tt> environment variable.                                                           ${line.separator}\
   </li>

changeHost_grdcctlsvr_manual_tail.txt=                                                                   ${line.separator}\
   </ul>                                                                                                 ${line.separator}\



updateConfigure_grdcctlsvr_head.txt=                                                                     ${line.separator}\
   <h4>SAS Grid Manager Control Server</h4><ul>                                                          ${line.separator}\

updateConfigure_grdcctlsvr_item.txt=                                                                     ${line.separator}\
   <li>                                                                                                  ${line.separator}\
     Updated the grid script files in the <b>${grdcctlsvr.config.dir}</b> directory.                     ${line.separator}\
   </li>

updateConfigure_grdcctlsvr_tail.txt=                                                                     ${line.separator}\
   </ul>
