warnings_checkauth_notfound.txt=<li><b>WARNING:</b> Unable to locate the <b>checkauth</b> file to determine if the Configure User Authentication step has been performed.  This step must be completed before running SAS servers.</li> ${line.separator}\

errors_configuration_targets_checkauth.txt=<p>The Configure User Authentication step was not completed during the SAS Foundation installation.  This step must be completed in order for SAS application servers to run.  Refer to the installation instructions for SAS Foundation to perform this step.</p> ${line.separator}\

warnings_configobj_notfound.txt=Metadata creation failed. As a result, the metadata associated with the previous configuration of this component was not loaded.  See the configuration log for details. You must unconfigure this component prior to each new configuration.</p></li> ${line.separator}\

warnings_configobj_alreadyset.txt=Metadata for a previous configuration of this component is already defined so it was not configured again.  See the configuration log for details. You must unconfigure this component prior to each new configuration.</p></li> ${line.separator}\

unconfiguration_head.txt=<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> ${line.separator}\
<html> ${line.separator}\
<head> ${line.separator}\
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> ${line.separator}\
<title>Summary of Configuration Removal</title> ${line.separator}\
<STYLE> ${line.separator}\
BODY {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H1 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H2 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H3 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H4 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DT {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
H5 {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
P  {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
LI {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
TD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
CODE {color: #000000; font-family: Courier, serif} ${line.separator}\
.detailTable {border-top: 1px solid #ddd; border-left: 1px solid #ddd; border-right: 1px solid #ddd} ${line.separator}\
.detailLabel {padding: 5px; text-align: right; font-weight: bold; border-bottom: 1px solid #ddd; border-right: 1px solid #ddd; padding-right: 10px} ${line.separator}\
.detailContent {padding: 5px; border-bottom: 1px solid #ddd} ${line.separator}\
</STYLE> ${line.separator}\
<body bgcolor="#FFFFFF" marginheight="0" marginWidth="5" topmargin="0" leftmargin="5"> ${line.separator}\
</head> ${line.separator}\
${line.separator}\
<TABLE border=0 cellPadding=0 cellSpacing=0 width="100%"> ${line.separator}\
<TR> ${line.separator}\
<td width="129" align="left" valign="top"><img src="file:///${cfgwizard.install.config.dir}/documents/images/colorBar.jpg" alt="Color bar" width="550" height="60"></td> ${line.separator}\
<td align="right" valign="top" width="100%" class="navlink"><A href="http://www.sas.com"><IMG src="file:///${cfgwizard.install.config.dir}/documents/images/saslogo.jpg" alt="SAS - The Power to Know" width="119" height="60" border="0"></A></td> ${line.separator}\
</TR> ${line.separator}\
</TABLE> ${line.separator}\
<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="file:///${cfgwizard.install.config.dir}/documents/images/spacer.gif" width="1" height="4" alt=""></div> ${line.separator}\

unconfiguration_head_title.txt=<center><h1>Summary of Configuration Removal<br>[${config.dir.name}-${config.level.name}] on &quot;${os.localhost.host.name}&quot;</h1></center> ${line.separator}\

unconfiguration_head_intro.txt=<p>This HTML file is temporary and currently resides in ${os.temp.dir}.  If you want to keep this HTML file for future reference, save it to a permanent location.</p><p>Unless specified, no user-modified content has been removed.</p> ${line.separator}\

unconfiguration_tail_outro.txt=<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="images/spacer.gif" width="1" height="4" alt=""></div>  ${line.separator}\
<p>Copyright &copy; 2011-2023, SAS Institute Inc., Cary, NC, USA.  All Rights Reserved</p> ${line.separator}\
</body></html> ${line.separator}\

updatePasswords_head.txt=<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> ${line.separator}\
<html> ${line.separator}\
<head> ${line.separator}\
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> ${line.separator}\
<title>Summary of Updating Passwords</title> ${line.separator}\
<STYLE> ${line.separator}\
BODY {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H1 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H2 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H3 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H4 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DT {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
H5 {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
P  {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
LI {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
TD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
CODE {color: #000000; font-family: Courier, serif} ${line.separator}\
.detailTable {border-top: 1px solid #ddd; border-left: 1px solid #ddd; border-right: 1px solid #ddd} ${line.separator}\
.detailLabel {padding: 5px; text-align: right; font-weight: bold; border-bottom: 1px solid #ddd; border-right: 1px solid #ddd; padding-right: 10px} ${line.separator}\
.detailContent {padding: 5px; border-bottom: 1px solid #ddd} ${line.separator}\
</STYLE> ${line.separator}\
<body bgcolor="#FFFFFF" marginheight="0" marginWidth="5" topmargin="0" leftmargin="5"> ${line.separator}\
</head> ${line.separator}\
${line.separator}\
<TABLE border=0 cellPadding=0 cellSpacing=0 width="100%"> ${line.separator}\
<TR> ${line.separator}\
<td width="129" align="left" valign="top"><img src="file:///${cfgwizard.install.config.dir}/documents/images/colorBar.jpg" alt="Color bar" width="550" height="60"></td> ${line.separator}\
<td align="right" valign="top" width="100%" class="navlink"><A href="http://www.sas.com"><IMG src="file:///${cfgwizard.install.config.dir}/documents/images/saslogo.jpg" alt="SAS - The Power to Know" width="119" height="60" border="0"></A></td> ${line.separator}\
</TR> ${line.separator}\
</TABLE> ${line.separator}\
<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="file:///${cfgwizard.install.config.dir}/documents/images/spacer.gif" width="1" height="4" alt=""></div> ${line.separator}\

updatePasswords_head_title.txt=<center><h1>Summary of Updating Passwords<br>[${config.dir.name}-${config.level.name}] on &quot;${os.localhost.host.name}&quot;</h1></center> ${line.separator}\

updatePasswords_head_intro.txt=<p>This file provides a summary of what was changed during the updating of passwords.  Any files that have been changed have been noted and changes made in the repository have been recorded as well.</p><p>Full synchronization of SAS internal passwords is provided. You don't have to make any corresponding changes in SAS Management Console.</p><p>Passwords controlled by an external provider (for example, in LDAP, Active Directory, or the host operating system) are not synchronized.  You must ensure that the passwords that you provide as input to this tool match the actual passwords in your external provider.</p> ${line.separator}\

updatePasswords_tail_outro.txt=<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="images/spacer.gif" width="1" height="4" alt=""></div>  ${line.separator}\
<p>Copyright &copy; 2011-2023, SAS Institute Inc., Cary, NC, USA.  All Rights Reserved</p> ${line.separator}\
</body></html> ${line.separator}\

instructions_installing_jmp_head.txt=<h2 id="installingjmp">Installing JMP Software</h2> ${line.separator}\

instructions_installing_jmp_item.txt=<p>To finish this deployment and install your JMP products, see the JMP Administrator's Guide at <a href="http://www.jmp.com/administrator" target="_blank">http://www.jmp.com/administrator</a> and the install support page at <a href="http://www.jmp.com/installsupport" target="_blank">http://www.jmp.com/installsupport</a>.</p> ${line.separator}\

instructions_completing_manual_deployment_head.txt=<h2 id="completingmanual">Completing Your Deployment</h2> ${line.separator}\
${line.separator}\
<p>In order to complete your deployment on this machine, certain manual steps have to be performed.  It is highly recommended that you have deployed all of your SAS Web Applications. All SAS Web Applications, including the SAS Web Infrastructure Platform and the SAS Content Server, should be started before continuing.</p> ${line.separator}\

instructions_completing_manual_deployment_tail.txt=<p>The steps detailed above resulted in the creation of log files, which can be found in <a href="${config.lev.logs.configure.dir}" target="_blank">${config.lev.logs.configure.dir}</a>. Review the contents of the scripts to determine the names of the log files that were created. Review the logs and make sure there were no errors. Each execution of these scripts overwrites the logs from previous executions. Therefore, before you run the scripts, you might want to make backups of the logs.</p> ${line.separator}\
<p>These manual steps require the use of the SAS Administrator account as well as the SAS Trusted User account.  The scripts contain the SAS Administrator's and SAS Trusted User's credentials with the password encrypted. Secure the scripts until they are used to complete your deployment. After the scripts are used, remove the credentials from the scripts as a security measure. For more information about when these scripts are used, see the SAS 9.4 Intelligence Platform: Middle Tier Administration Guide and the section &quot;Deploying Content Manually to the Content Server&quot; at <a href="http://support.sas.com/documentation/cdl/en/bimtag/68217/HTML/default/viewer.htm#p0031g0e3scg8kn1i6vs4z0w1cbk.htm">http://support.sas.com/documentation/cdl/en/bimtag/68217/HTML/default/viewer.htm#p0031g0e3scg8kn1i6vs4z0w1cbk.htm</a>.</p> ${line.separator}\

instructions_manualdeploy_loadcontent_head.txt=<h3>Loading Content to the SAS Content Server</h3> ${line.separator}\

instructions_manualdeploy_loadcontent_details_list_head.txt=<ul> ${line.separator}\

instructions_manualdeploy_loadcontent_details_list_item.txt=<li><p>Since you selected to not automatically deploy your SAS Web Applications, manual steps are required to ensure the proper content is loaded to the SAS Content Server.  The file, ${config.loadcontent.file}, has been created to facilitate this process.</p></li> ${line.separator}\

instructions_manualdeploy_updatecontent_details_list_item.txt=<li><p>Since you selected to not automatically deploy your SAS Web Applications, manual steps are required to ensure the proper content is updated in the SAS Content Server.  The file, ${config.updatecontent.file}, has been created to facilitate this process.</p></li> ${line.separator}\

instructions_manualdeploy_loadcontent_details_list_windows_item.txt=<li><p>Click <a href="${config.loadcontent.file}">here</a> to run this script to automatically load content for the SAS Web Applications that require it.</p></li> ${line.separator}\

instructions_manualdeploy_updatecontent_details_list_windows_item.txt=<li><p>Click <a href="${config.updatecontent.file}">here</a> to run this script to automatically update content for the SAS Web Applications that require it.</p></li> ${line.separator}\

instructions_manualdeploy_loadcontent_details_list_unix_item.txt=<li><p>Execute ${config.loadcontent.file} to automatically load content for the SAS Web Applications that require it.</p></li> ${line.separator}\

instructions_manualdeploy_updatecontent_details_list_unix_item.txt=<li><p>Execute ${config.updatecontent.file} to automatically update content for the SAS Web Applications that require it.</p></li> ${line.separator}\

instructions_manualdeploy_loadcontent_details_list_tail.txt=</ul> ${line.separator}\

warnings_manualdeploy_loadcontent_manual_config_needed.txt=<li><p>Because you selected to not automatically deploy your SAS Web Applications, you will need to perform some manual steps to complete the configuration of them.  Once you have deployed the SAS Web Applications, including the SAS Web Infrastructure Platform, you will need to manually load content to the SAS Content Server.  Follow the instructions below to accomplish this.</p></li> ${line.separator}\

instructions_manualdeploy_adjustURLs_head.txt=<h3>Adjusting Directive URLs</h3> ${line.separator}\

instructions_manualdeploy_adjustURLs_details_list_head.txt=<ul> ${line.separator}\

instructions_manualdeploy_adjustURLs_details_list_item.txt=<li><p>Since you selected to not automatically deploy your SAS Web Applications, manual steps are required to ensure Directive URLs are correct.  The file, ${config.adjusturls.file}, has been created to facilitate this process.</p></li> ${line.separator}\

instructions_manualdeploy_adjustURLs_details_list_windows_item.txt=<li><p>Click <a href="${config.adjusturls.file}">here</a> to run this script to automatically adjust the Directive URLs for the SAS Web Applications that require it.</p></li> ${line.separator}\

instructions_manualdeploy_adjustURLs_details_list_unix_item.txt=<li><p>Execute ${config.adjusturls.file} to automatically adjust the Directive URLs for the SAS Web Applications that require it.</p></li> ${line.separator}\

instructions_manualdeploy_adjustURLs_details_list_tail.txt=</ul> ${line.separator}\

warnings_manualdeploy_adjustURLs_manual_config_needed.txt=<li><p>Because you selected to not automatically deploy your SAS Web Applications, content has not been loaded or updated in the SAS Content Server.  When the manual loading of content is complete, you will need to perform additional steps to adjust any links within the metadata repository that require it in order to complete this configuration.  Follow the instructions below to accomplish this.</p></li> ${line.separator}\

#=============================================================
#  changeHost target
#=============================================================

# changeHost: header
changeHost_header.txt=<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> ${line.separator}\
<html> ${line.separator}\
<head> ${line.separator}\
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> ${line.separator}\
<title>Summary of Update Host Name References</title> ${line.separator}\
<STYLE> ${line.separator}\
BODY {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H1 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H2 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H3 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H4 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DT {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
H5 {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
P  {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
LI {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
TD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
CODE {color: #000000; font-family: Courier, serif} ${line.separator}\
.detailTable {border-top: 1px solid #ddd; border-left: 1px solid #ddd; border-right: 1px solid #ddd} ${line.separator}\
.detailLabel {padding: 5px; text-align: right; font-weight: bold; border-bottom: 1px solid #ddd; border-right: 1px solid #ddd; padding-right: 10px} ${line.separator}\
.detailContent {padding: 5px; border-bottom: 1px solid #ddd} ${line.separator}\
</STYLE> ${line.separator}\
<body bgcolor="#FFFFFF" marginheight="0" marginWidth="5" topmargin="0" leftmargin="5"> ${line.separator}\
</head> ${line.separator}\
${line.separator}\
<TABLE border=0 cellPadding=0 cellSpacing=0 width="100%"> ${line.separator}\
<TR> ${line.separator}\
<td width="129" align="left" valign="top"><img src="${cfgwizard.install.config.dir}/documents/images/colorBar.jpg" alt="Color bar" width="550" height="60"></td> ${line.separator}\
<td align="right" valign="top" width="100%" class="navlink"><A href="http://www.sas.com"><IMG src="${cfgwizard.install.config.dir}/documents/images/saslogo.jpg" alt="SAS - The Power to Know" width="119" height="60" border="0"></A></td> ${line.separator}\
</TR> ${line.separator}\
</TABLE> ${line.separator}\
<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="${cfgwizard.install.config.dir}/documents/images/spacer.gif" width="1" height="4" alt=""></div> ${line.separator}\

changeHost_header_title.txt=<center><h1>Summary of Update Host Name References<br> for ${config.dir.name}-${config.level.name}</h1></center>${line.separator}\

changeHost_header_intro.txt=<p>This file provides a summary of the updates made during the Update Host Name References task for the ${config.dir.name}-${config.level.name} deployment (${config.lev.dir}).</p><p>All updates to files and metadata objects are recorded in this report. Matching host names found in miscellaneous files are reported. Any manual steps to update host name references that could not be performed automatically are listed.</p>${line.separator}\

changeHost_header_match_start.txt=<p>Host name search and replacement includes the following:</p><ul>${line.separator}\

changeHost_header_match.txt=<li>Search for <b>${oldhost.token}</b> and replace with <b>${newhost.token}</b> ${line.separator}\

changeHost_header_match_end.txt=</ul>${line.separator}\

# changeHost: changed
changeHost_changed_head.txt=<h3 id=changed>Updated Host Name References</h3><p>This section lists all the places where matching host name values have been updated.</p> ${line.separator}\

changeHost_changed_tail.txt=

# changeHost: changed files
changeHost_files_head.txt=<h4 id=files>Updated Files</h4><p>This section lists files where host name references have been updated.</p> ${line.separator}\
   <ul> ${line.separator}\
   
changeHost_files_item.txt=<li>File <b>${param.token}</b> has been updated from ${oldhost.token} to ${newhost.token} at line ${param2.token}.  ${line.separator}\

changeHost_files_warning_item.txt=<li><b>WARNING:</b> Unable to update host name references in file <b>${param.token}</b> from ${oldhost.token} to ${newhost.token}. ${param2.token} ${line.separator}\

changeHost_files_tail.txt=</ul>${line.separator}\

# changeHost: changed configurable objects
changeHost_configobj_head.txt=<h4 id=configobj>Updated Properties</h4><p>This section lists metadata configurable object properties where host name references have been updated.</p> ${line.separator}\
   <ul> ${line.separator}\
   
changeHost_configobj_item.txt=<li>Property <b>${param.token}</b> has been updated from ${oldhost.token} to ${newhost.token}. ${line.separator}\

changeHost_configobj_warning_item.txt=<li><b>WARNING:</b> Unable to update the object name for ${oldhost.token} to ${newhost.token}. ${param.token} ${line.separator}\

changeHost_configobj_tail.txt=</ul>${line.separator}\

# changeHost: changed metadata objects
changeHost_metadata_head.txt=<h4 id=metadata>Updated Metadata Objects</h4><p>This section lists metadata objects where host name references have been updated.</p> ${line.separator}\
   <ul> ${line.separator}\
   
changeHost_metadata_item.txt=<li>${param.token} ${line.separator}\

changeHost_metadata_warning_item.txt=<li><b>WARNING:</b> Unable to update the object name for ${oldhost.token} to ${newhost.token}. ${param.token} ${line.separator}\

changeHost_metadata_tail.txt=</ul>${line.separator}\

# changeHost: manual steps
changeHost_manual_head.txt=<h3 id=manual>Required Steps to Complete Host Name References</h3><p>This section lists required manual steps for finalizing the host name references. These manual steps are needed because the tasks could not be automated.</p> ${line.separator}\

changeHost_manual_tail.txt=

# changeHost: reported files
changeHost_reported_head.txt=<h3 id=reported>Report Miscellaneous Host Name References</h3><p>This section reports miscellaneous files where host name references have been found, but could not be changed programmatically. Therefore, the host name references found in these files have not been replaced, unless you were instructed to do so in earlier manual steps in this report. Review the list to determine if the host name should be changed manually. Note that some files were excluded from this search, such as binary files, log files, and temporary files. You may want to review those manually as well.</p> ${line.separator}\
   <ul> ${line.separator}\
   
changeHost_reported_list.txt=<li>File <b>${param.token}</b> was found to contain a host name reference matching <b><i>${oldhost.token}</i></b>. ${line.separator}\

changeHost_reported_item.txt=<ul><li>Found at line ${param.token}: ${param2.token}</ul> ${line.separator}\

changeHost_reported_tail.txt=</ul> ${line.separator}\

# changeHost: footer
changeHost_footer_head.txt=<h3 id=notes>Notes</h3><p>This section lists notes and helpful links.</p> ${line.separator}\

changeHost_footer_tail.txt=<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="images/spacer.gif" width="1" height="4" alt=""></div>  ${line.separator}\
<p>Copyright &copy; 2011-2023, SAS Institute Inc., Cary, NC, USA.  All Rights Reserved</p> ${line.separator}\
</body></html> ${line.separator}\

changeHost_tail.outro.txt=

# changeHost: toc
changeHost_toc_head.txt=<h3>Contents</h3>  ${line.separator}\
<ol> ${line.separator}\

changeHost_toc.changed_head.txt=<li><a href="#changed">Updated Host Name References</a></li> ${line.separator}\

changeHost_toc.files_head.txt=<li><a href="#files">Updated Files</a></li> ${line.separator}\

changeHost_toc.configobj_head.txt=<li><a href="#configobj">Updated Properties</a></li> ${line.separator}\

changeHost_toc.metadata_head.txt=<li><a href="#metadata">Updated Metadata Objects</a></li> ${line.separator}\

changeHost_toc.manual_head.txt=<li><a href="#manual">Required Steps to Complete Host Name References</a></li> ${line.separator}\

changeHost_toc.reported_head.txt=<li><a href="#reported">Report Miscellaneous Host Name References</a></li> ${line.separator}\

changeHost_toc.notes_head.txt=<li><a href="#notes">Notes</a></li> ${line.separator}\

changeHost_toc_tail.txt=</ol> ${line.separator}\

#=============================================================
#  maintconfig target
#=============================================================

# maintconfig: header
maintconfig_header.txt=<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> ${line.separator}\
<html> ${line.separator}\
<head> ${line.separator}\
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> ${line.separator}\
<title>Summary of Maintenance Configuration</title> ${line.separator}\
<STYLE> ${line.separator}\
BODY {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H1 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H2 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H3 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H4 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DT {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
H5 {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
P  {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
LI {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
TD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
CODE {color: #000000; font-family: Courier, serif} ${line.separator}\
.detailTable {border-top: 1px solid #ddd; border-left: 1px solid #ddd; border-right: 1px solid #ddd} ${line.separator}\
.detailLabel {padding: 5px; text-align: right; font-weight: bold; border-bottom: 1px solid #ddd; border-right: 1px solid #ddd; padding-right: 10px} ${line.separator}\
.detailContent {padding: 5px; border-bottom: 1px solid #ddd} ${line.separator}\
</STYLE> ${line.separator}\
<body bgcolor="#FFFFFF" marginheight="0" marginWidth="5" topmargin="0" leftmargin="5"> ${line.separator}\
</head> ${line.separator}\
${line.separator}\
<TABLE border=0 cellPadding=0 cellSpacing=0 width="100%"> ${line.separator}\
<TR> ${line.separator}\
<td width="129" align="left" valign="top"><img src="${cfgwizard.install.config.dir}/documents/images/colorBar.jpg" alt="Color bar" width="550" height="60"></td> ${line.separator}\
<td align="right" valign="top" width="100%" class="navlink"><A href="http://www.sas.com"><IMG src="${cfgwizard.install.config.dir}/documents/images/saslogo.jpg" alt="SAS - The Power to Know" width="119" height="60" border="0"></A></td> ${line.separator}\
</TR> ${line.separator}\
</TABLE> ${line.separator}\
<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="${cfgwizard.install.config.dir}/documents/images/spacer.gif" width="1" height="4" alt=""></div> ${line.separator}\
<center><h1>Summary of the Update Configuration<br> for ${config.dir.name}-${config.level.name}</h1></center>${line.separator}\

maintconfig_header_intro.txt=<p>This file describes remaining steps that must be taken in order to complete the update process for the deployment located in this directory<p>${config.lev.dir}</p><p><h1>Manual Steps</h1>Any manual steps required for maintenance that could not be performed automatically are listed.  If none are listed then the update process is complete for the deployment in this directory.</p> ${line.separator}

generaltarget_tail_outro.txt=<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="images/spacer.gif" width="1" height="4" alt=""></div>  ${line.separator}\
<p>Copyright &copy; 2011-2023, SAS Institute Inc., Cary, NC, USA.  All Rights Reserved</p> ${line.separator}\
</body></html> ${line.separator}

#=============================================================
#  autoLoad target
#=============================================================

# autoLoad: header
autoLoad_header.txt=<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> ${line.separator}\
<html> ${line.separator}\
<head> ${line.separator}\
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> ${line.separator}\
<title>Summary of Autoload Task</title> ${line.separator}\
<STYLE> ${line.separator}\
BODY {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H1 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
H2 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H3 {color: #000000; font-family: Arial, Helvetica, sans-serif; padding-top: 1em;} ${line.separator}\
H4 {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DT {color: #000000; font-family: Arial, Helvetica, sans-serif;} ${line.separator}\
DD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
H5 {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
P  {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
LI {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
TD {color: #000000; font-family: Arial, Helvetica, sans-serif} ${line.separator}\
CODE {color: #000000; font-family: Courier, serif} ${line.separator}\
.detailTable {border-top: 1px solid #ddd; border-left: 1px solid #ddd; border-right: 1px solid #ddd} ${line.separator}\
.detailLabel {padding: 5px; text-align: right; font-weight: bold; border-bottom: 1px solid #ddd; border-right: 1px solid #ddd; padding-right: 10px} ${line.separator}\
.detailContent {padding: 5px; border-bottom: 1px solid #ddd} ${line.separator}\
</STYLE> ${line.separator}\
<body bgcolor="#FFFFFF" marginheight="0" marginWidth="5" topmargin="0" leftmargin="5"> ${line.separator}\
</head> ${line.separator}\
${line.separator}\
<TABLE border=0 cellPadding=0 cellSpacing=0 width="100%"> ${line.separator}\
<TR> ${line.separator}\
<td width="129" align="left" valign="top"><img src="${cfgwizard.install.config.dir}/documents/images/colorBar.jpg" alt="" width="550" height="60"></td> ${line.separator}\
<td align="right" valign="top" width="100%" class="navlink"><A href="http://www.sas.com"><IMG src="${cfgwizard.install.config.dir}/documents/images/saslogo.jpg" alt="SAS - The Power to Know" width="119" height="60" border="0"></A></td> ${line.separator}\
</TR> ${line.separator}\
</TABLE> ${line.separator}\
<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="${cfgwizard.install.config.dir}/documents/images/spacer.gif" width="1" height="4" alt=""></div> ${line.separator}\

autoLoad_header_title.txt=<center><h1>Summary of Autoload Task<br> for ${config.dir.name}-${config.level.name}</h1></center>${line.separator}\

autoLoad_header_intro.txt=<p>This file provides a summary of the updates made during the Autoload task for the ${config.dir.name}-${config.level.name} deployment (${config.lev.dir}).</p><p>All updates to files and metadata objects are recorded in this report.</p>${line.separator}\

autoLoad_header_match_start.txt=<p>The following metadata objects have been created for LASR Autoload:</p><ul>${line.separator}\

autoLoad_header_match.txt=<li>SASLibrary: ${cfgwizard.lasr.library.name}</li> ${line.separator}\
<li>ServerComponent: ${cfgwizard.lasrserver.name}</li> ${line.separator}\
<li>Tree: /Products/SAS LASR Analytics/${cfgwizard.lasr.library.name}</li> ${line.separator}\

autoLoad_header_match_end.txt=</ul>${line.separator}\

autoLoad_header_match2_start.txt=<p>${cfgwizard.lasrserver.name} already exists.  Skipping creation.</p><p>The following metadata objects have been created for LASR Autoload:</p><ul>${line.separator}\

autoLoad_header_match2.txt=<li>SASLibrary: ${cfgwizard.lasr.library.name}</li> ${line.separator}\
<li>Tree: /Products/SAS LASR Analytics/${cfgwizard.lasr.library.name}</li> ${line.separator}\

autoLoad_header_match2_end.txt=</ul>${line.separator}\

autoLoad_library_information.txt=${cfgwizard.lasr.library.name} already exists.  Skipping creation.  Its extended attribute <i>VA.AutoLoad.Enabled</i> has been set to 'Yes', and <i>VA.AutoLoad.Location</i> has been set to '${va.autoload.location.txt}'.  Additional extended attributes can be changed manually. ${line.separator}\

autoLoad_header_disk_start.txt=<p>The following on-disk artifacts have been created:</p><ul>${line.separator}\

autoLoad_header_disk.txt=<li>${cfgwizard.autoload.location}</li> ${line.separator}\
<li>${cfgwizard.autoload.location}${file.separator}Unload</li> ${line.separator}\
<li>${cfgwizard.autoload.location}${file.separator}Logs</li> ${line.separator}\
<li>${cfgwizard.autoload.location}${file.separator}Formats</li> ${line.separator}\
<li>${cfgwizard.autoload.location}${file.separator}Append</li> ${line.separator}\
<li>${config.lev.applications.dir}${file.separator}AutoLoad${file.separator}${cfgwizard.lasr.library.libref}${file.separator}AutoLoad.cfg</li> ${line.separator}\
<li>${config.lev.applications.dir}${file.separator}AutoLoad${file.separator}${cfgwizard.lasr.library.libref}${file.separator}AutoLoad.sas</li> ${line.separator}\
<li>${config.lev.applications.dir}${file.separator}AutoLoad${file.separator}${cfgwizard.lasr.library.libref}${file.separator}AutoLoad_usermods.cfg</li> ${line.separator}\
<li>${config.lev.applications.dir}${file.separator}AutoLoad${file.separator}${cfgwizard.lasr.library.libref}${file.separator}${runsas.name}</li> ${line.separator}\
<li>${config.lev.applications.dir}${file.separator}AutoLoad${file.separator}${cfgwizard.lasr.library.libref}${file.separator}${schedule.file.name}</li> ${line.separator}\
<li>${config.lev.applications.dir}${file.separator}AutoLoad${file.separator}${cfgwizard.lasr.library.libref}${file.separator}${unschedule.file.name}</li> ${line.separator}\

autoLoad_header_disk_end.txt=</ul>${line.separator}\

# autoload: lasrfolder
autoLoad_lasrfolder_disk_start.txt=<p>We were unable to find a single unique instance for this LASR Library, and therefore were unable to set permissions on it. Here are the groups and respective permissions we recommend:</p><ul>${line.separator}\

autoLoad_lasrfolder_disk.txt=<b>Visual Analytics Data Administrators:</b><ul> ${line.separator}\
<li>Read</li> ${line.separator}\
<li>ReadMetadata</li> ${line.separator}\
<li>Write</li> ${line.separator}\
<li>WriteMemberMetadata</li></ul> ${line.separator}\
<b>Visual Data Builder Administrators:</b><ul> ${line.separator}\
<li>Read</li> ${line.separator}\
<li>ReadMetadata</li> ${line.separator}\
<li>Write</li> ${line.separator}\
<li>WriteMemberMetadata</li></ul> ${line.separator}\

autoLoad_lasrfolder_disk_end.txt=${line.separator}\

# autoLoad: footer
autoLoad_footer_head.txt=<h3 id=notes>Notes</h3><p><ul>${line.separator}\
<li>The drop zone location for tables to automatically be picked up and loaded into LASR is <i>${cfgwizard.autoload.location}</i>.</li>${line.separator}\
<li>The schedule and unschedule scripts must be run to schedule and unschedule Autoload, respectively.</i></li>${line.separator}\
</ul></p> ${line.separator}\

autoLoad_footer_tail.txt=<div style="border: 1px solid #000000; border-left:none; border-right:none;"><img src="images/spacer.gif" width="1" height="4" alt=""></div>  ${line.separator}\
<p>Copyright &copy; 2011-2023, SAS Institute Inc., Cary, NC, USA.  All Rights Reserved</p> ${line.separator}\
</body></html> ${line.separator}\

autoLoad_tail.outro.txt=