Providing software solutions since 1976

TECHNICAL SUPPORT HOT FIXES
Hot Fix Quick Links
* SAS Hot Fix Home
* SAS Viya
* SAS 9.4
* SAS 9.3
* SAS 9.2
* SAS DataFlux
* All Products and Software
Releases
Hot Fix FAQ
 
Hot Fix FAQ

General Hot Fix Questions:
 
 What is a hot fix?
 What is a container hot fix?
 Which hot fixes should I apply?
 How can I tell which release of SAS a hot fix can be applied to?
 Why are some issues addressed in hot fixes labeled "ALERT"?
 How can I receive automatic notification when a new hot fix becomes available?
 Where can I find information regarding hot fixes for CVE (Common Vulnerabilities and Exposures) issues?
 How can I request a hot fix?
 When will my hot fix be ready?


Installation Questions:
 
 Should hot fixes be installed in a specific order?
 Will installing one hot fix over-write another fix?
 How do I know if my hot fix installation was successful?
 How do I cancel a hot fix installation?
 Is a "silent" installer or "batch mode" installer available for hot fixes?
 Is it possible to apply a hot fix multiple times on the same SAS image?
 How can I determine which hot fixes have been applied to my SAS installation?
 How do I know which hot fixes should be installed to bring my system up to date?


 
 
qa.gif (1572 bytes)    What is a hot fix?

The answer can vary. To some it is a quick fix to an immediate problem or an essential fix to a commonly recurring problem. To others, it is system maintenance.

Technical Support's hot fix focus is on the need to solve critical and frequently recurring problems. These alert priority defects will be evaluated for hot fix consideration. If the fix can be created with a reasonable impact to the source code and testing coverage can confirm accurate results, the hot fix will be pursued. Fixes that require a significant code update, impose a great potential for regressions in the software, are considered enhancements to the existing software, or are considered to have a minor impact on customers will be deferred to a subsequent SAS release. This will help us to ensure the reliability of hot fixes.

Hot fixes have been tested and are fully supported. Most hot fixes are incorporated into the next scheduled release.

Developing a viable work around to a problem is still the preferred approach over providing a hot fix, and hot fixing every problem that customers encounter is not practical. However, we do want to provide fixes that allow customers to “maintain” their installed production SAS System until they are reasonably able to upgrade to the latest SAS release.

Top ^
 
 
qa.gif (1572 bytes)    What is a container hot fix?

A "CONTAINER" hot fix delivers one or more "MEMBER" hot fixes in one downloadable unit. A CONTAINER hot fix is only an outer shell. It is the MEMBER hot fixes inside it that update the SAS software components.

General rules about CONTAINER hot fixes:

1) The hot fix installation instructions will indicate if a hot fix is a CONTAINER. The installation instructions will also list the SAS software components that will be updated by the MEMBER hot fixes. Special attention should be given for any pre/post installation steps outlined in the instructions.

2) A CONTAINER hot fix must be applied separately to each machine. The installation process will apply only those MEMBER hot fixes which are applicable based on the SAS Deployment Registry for each specific machine.

3) The following table lists where you will see CONTAINER and MEMBER hot fix id's:
 CONTAINER Hot Fix IDMEMBER Hot Fix ID
SAS Hot Fix Download SiteYESNO
Hot Fix Installation InstructionsYESYES
SAS Deployment Manager ScreensNOYES
SAS Deployment RegistryNOYES
SAS DeploymentRegistry.txt/.htmlNOYES
SASHFADD* Analysis ReportYESNO
SASHFADD* DEPLOY_ DirectoryYESNO

* The SAS Hot Fix Analysis, Download and Deployment Tool (SASHFADD) will correctly identify CONTAINER hot fixes which have MEMBERS that can be applied to your SAS deployment.

4) SAS 9.4 and SAS 9.3 CONTAINER hot fixes may contain MEMBER hot fixes for multiple operating systems. The SAS Deployment Manager will apply only those MEMBER hot fixes which are applicable for the operating system on each specific machine.

5) SAS 9.2 CONTAINER hot fixes will contain individual MEMBER hot fixes specific to an operating system. If the SAS components are installed across multiple operating systems, the relevant SAS 9.2 hot fix CONTAINER for each operating system should be downloaded and applied to the applicable machine(s).

More information on installing hot fixes is available.

SAS 9.4: SAS Deployment Wizard and SAS Deployment Manager 9.4: User’s Guide
SAS 9.3: SAS Deployment Wizard and SAS Deployment Manager 9.3: User’s Guide
SAS 9.2: Using the Maintenance Installation Tool to Install SAS® Hot Fixes - Usage and Troubleshooting Guide

Top ^
 
 
qa.gif (1572 bytes)    Which hot fixes should I apply?

There are two philosophies which can be followed when determining which hot fixes should be applied.

Philosophy 1: ”Install only what is needed”

Some sites are interested in fixing only those problems that they encounter. They do not see the necessity of installing fixes for problems that do not affect them. They want to install just the fixes that are needed to keep their existing jobs running successfully. This minimizes the number of changes and regression testing to their SAS installations and the time spent installing hot fixes. These sites should download hot fixes only on an as-needed basis.

Philosophy 2: “Install every fix that is available”

Other sites want to be proactive by keeping their SAS installation updated with all of the latest fixes. These are typically larger sites that use many different components of the software. There are also users who are more comfortable with always running the "latest and greatest". For these sites, downloading the available product hot fixes at set intervals of time is the best and most efficient approach.

Neither philosophy is better or more correct than the other; they are just two different ways of thinking. It is up to each site to determine which philosophy best meets its business needs.

Top ^
 
 
qa.gif (1572 bytes)    How can I tell which release of SAS a hot fix can be applied to?

Unless otherwise noted on the hot fix download page, individual hot fixes are designed for specific releases of SAS. A hot fix should NOT be applied to a SAS release or to an Additional SAS Product or Solution other than the one for which it was intended.

An easy way to know if a hot fix is designed for a specific release of SAS is to look at the characters of the hot fix ID and reference the following table:

SAS releaseHot Fix naming convention:
9.2 (9.2 TS2M0), 9.3, and 9.4 Example: A01005wn
A01005wn = a unique code that identifies the SAS product and version to receive the hot fix
A01005wn = an incremental value for each hot fix that applies to the above code
A01005wn = the operating system for the hot fix (in this example, Windows)

See SAS Note SN-35960 for more information on the hot fix naming convention for SAS 9.2, SAS 9.3, and SAS 9.4.
9.2 (9.2 TS1M0)hot fix name begins with F9
Top ^
 
 
qa.gif (1572 bytes)    Why are some issues addressed in hot fixes labeled "ALERT"?

ALERT issues are problems that you need to be aware of before you install or use the software. These may include, but are not limited to, security, data integrity and incorrect output.

These issues are identified with the word ALERT appearing in the "Issue(s) Addressed" list for the hot fix.

Hot Fix announcements made to the TSNEWS-L listserv also include special notification when a hot fix is released for an ALERT issue.

Top ^
 
 
qa.gif (1572 bytes)    How can I receive automatic notification when a new hot fix becomes available?

When new hot fixes become available, announcements are posted to the SAS Communities Hot Fix Site.

Please review How to stay current about SAS hot fixes to learn more about the site, including how to receive timely Hot Fix announcements via e-mail and RSS feed.

Top ^
 
 
qa.gif (1572 bytes)    Where can I find information regarding hot fixes for CVE (Common Vulnerabilities and Exposures) issues?

See our Security Bulletins from SAS page for CVE information:

http://support.sas.com/security/alerts.html

Top ^
 
 
qa.gif (1572 bytes)    How can I request a hot fix?
qa.gif (1572 bytes)    When will my hot fix be ready?

SAS Technical Support cannot guarantee a release date for a hot fix. It can take anywhere from less than a week to several weeks for a hot fix to be made available. The major factors that affect the hot fix delivery timeframe are the complexity and quantity of the fixes that the hot fix contains, the volume and criticality of other hot fixes that are being processed simultaneously, and the types of issues that arise during the testing cycles of the hot fix package.

If you would like to request a hot fix for a specific issue, you should open a track with SAS Technical Support. 

Though not required, providing the following information would be very helpful:

  • How is the software problem impacting your site?
  • What risks are involved while the issue persists?
  • Is a production system impacted?
  • How many users are affected?
  • What workarounds have you found, and why are they unacceptable?
  • Is there a specific date when you require a fix, and what is the significance of that date?
Top ^
 
 
qa.gif (1572 bytes)    Should hot fixes be installed in a specific order?
qa.gif (1572 bytes)    Will installing one hot fix over-write another fix?

No, hot fixes do not have to be installed in any specific order ...
and
No, installing one hot fix will not overwrite a previously installed fix ...

for three reasons:

  1. All of the updated files (i.e. modules, catalogs, message files, etc) necessary for a fix are included in the one hot fix.
  2. No two production hot fixes contain the same updated files.
  3. Hot fixes are cumulative. When an existing hot fix is replaced with a newer version which contains additional fixes, all previous fixes are also included. For this reason, do not install a previous version (i.e. replaced version) of a hot fix once the current version has been applied.
Top ^
 
 
qa.gif (1572 bytes)    How do I know if my hot fix installation was successful?

For SAS 9.2, Phase 2 (TS2M0), SAS 9.3, and SAS 9.4 the final dialog box of the installation (the Installation Complete dialog box), provides information about the files that were successfully updated during an installation.

Installation log files for each hot fix installation are stored in the following locations:

SAS 9.3 and SAS 9.4:  !SASHOME\InstallMisc\InstallLogs\*_hot-fix-name_*.log
SAS 9.2, Phase 2 (TS2M0):  !SASHOME\InstallMisc\InstallLogs\Maintenance\*_hot-fix-name_*.log
The *preexec.log file provides detailed information about the installation process before the install has executed; the *postexec.log file provides detailed information after it has executed. The IT*.log, with a datetime that corresponds to the datetime on the *_hot-fix-name_*.log file, provides detailed information regarding the steps executed during the install process.
Top ^
 
 
qa.gif (1572 bytes)    How do I cancel a hot fix installation?

For SAS 9.2, Phase 2 (TS2M0), SAS 9.3, and SAS 9.4 use the Cancel button to cancel an installation. If the installation is cancelled through an acceptable means (for example, by clicking the Cancel button) rather than by terminating the process, you might receive the following message:

Installation could not be completed. No changes have been made to your system.
The installer then restores the original content before any changes are made.
Top ^
 
 
qa.gif (1572 bytes)    Is a "silent" installer or "batch mode" installer available for hot fixes?

For SAS 9.4, see the 'Using the Hot Fix Launcher Script' section in SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

For SAS 9.3, see the 'Using the Hot Fix Launcher Script' section in SAS Deployment Wizard and SAS Deployment Manager 9.3: User's Guide.

For SAS 9.2 (TS2M0), see the 'Silent Installation' section in Maint_Install_Tool.pdf.

Top ^
 
 
qa.gif (1572 bytes)    Is it possible to apply a hot fix multiple times on the same SAS image?

For SAS 9.3 and SAS 9.4, after the SAS Deployment Manager installs a hot fix on a machine, the deployment registry is updated to indicate the inclusion of that hot fix. On subsequent uses of the SAS Deployment Manager, hot fixes are checked against the deployment registry so that previously installed hot fixes are not reinstalled. If you want the SAS Deployment Manager to ignore that hot fixes have already been installed on a machine and include them in another installation pass, use the -reinstallhotfix command line option.

Example: sasdm.exe -reinstallhotfix

For SAS 9.2, Phase 2 (TS2M0), see SAS Note SN-35780, "Attempts to re-apply SAS 9.2 hot fixes will fail."

Top ^
 
 
qa.gif (1572 bytes)    How can I determine which hot fixes have been applied to my SAS installation?

For SAS 9.2, Phase 2 (TS2M0) , SAS 9.3, and SAS 9.4 the installation of hot fixes is logged in the SAS Deployment Registry. A reporting utility named ViewRegistry (available in sas.tools.viewregistry.jar) processes the deployment registry and generates a report file named DeploymentRegistry.html. This report identifies all SAS software that is installed in the current SASHOME location, including hot fixes.

For more information about the ViewRegistry utility, including details about how to access and execute the utility, see SAS Note 35968, "Using the ViewRegistry Report and other methods to determine the SAS 9.2 and later software releases and hot fixes that are installed."

Top ^
 
 
qa.gif (1572 bytes)    How do I know which hot fixes should be installed to bring my system up to date?

The SAS Hot Fix Analysis, Download and Deployment Tool (SASHFADD) will analyze a SAS 9.2, SAS 9.3 or SAS 9.4 deployment, create a customized report listing hot fixes available for the installed SAS products and generate scripts that will automate the download of the hot fixes.

For more details, see the HFADD Usage Guide and the HFADD download page.

Top ^
 
 

 

Copyright © 2016 SAS Institute Inc. All Rights Reserved.