INSTALLATION INSTRUCTIONS FOR THE SASŪ 9.4 DBRMs DOWNLOAD ON z/OS 


SAS 9.4 DBRM member(s) for SAS/ACCESS Interface to DB2

BEFORE DOWNLOADING:

This download addresses the fact that the Database Request Modules (DBRMs)
members that are needed for the DB2 bind are not included as part of the 
SAS Depot and must be downloaded separately.  

The following files will be included:

      * DBRM94_V10.xmit
             Partitioned data set (PDS) in XMIT format.  This file contains 
             the DBRM members (SAS94 and SAS94X) needed for the bind if you
             are accessing DB2 V10 New Function Mode (NFM) and running 
             SAS 9.4.


      * DBRM94_V11.xmit
             PDS in XMIT format.  This file contains the DBRM member (SAS94)
             needed for the bind if you are accessing DB2 V11 NFM and running          
             SAS 9.4. 
             Note: Starting in DB2 V11, the SAS94X DBRM member is no longer 
             being included because a different DBRM member is not needed 
             for binds for the remote servers.  Instead, you can now
             also use the SAS94 member for the binds for the remote servers.


      * DBRM94_V12.xmit
             PDS in XMIT format.  This file contains the DBRM member (SAS94)
             needed for the bind if you are accessing DB2 V12 NFM and running          
             SAS 9.4. 
             Note: Starting in DB2 V11, the SAS94X DBRM member is no longer 
             being included because a different DBRM member is not needed 
             for binds for the remote servers.  Instead, you can now
             also use the SAS94 member for the binds for the remote servers.


INSTALLATION INSTRUCTIONS:

The following instructions describe the steps for extracting the contents of 
the downloaded files, moving the file(s) to your z/OS system and installing 
the appropriate DBRM member(s).  


STEP 1: PRE-ALLOCATE AN XMIT FILE ON z/OS (required)

  Pre-allocate file under z/OS (for example, 'sas.dbrm94.v10.xmit',
  'sas.dbrm94.v11.xmit, or 'sas.dbrm94.v12.xmit') with the following data
  control blocks (DCBs).     

     Organization  : PS
     Record format : FB
     Record length : 80
     Block size    : 3120


STEP 2: USE FTP TO TRANSFER THE XMIT FILE TO z/OS (required) 

  Use File Transfer Protocol (FTP) to transfer the appropriate XMIT file 
  into the newly created file. For example,  
  DBRM94_V10.xmit would be stored in 'sas.dbrm94.v10.xmit' 
  DBRM94_V11.xmit would be stored in 'sas.dbrm94.v11.xmit' and
  DBRM94_V12.xmit would be stored in 'sas.dbrm94.v12.xmit'. 

          -  Download the packaged hot fix to your computer.  The
             packaged hot fix is a is a self extracting executable.
             Launching the executable extracts the z/OS files to a 
             default location

                   example: C:\Documents and Settings\userid\Local Settings\Temp

             You are prompted during the extraction process to accept or
             overwrite the default unzip location.  The remaining steps 
             in these installation instructions assume that you have 
             unzipped the files to the default location.

             After extracting the files, use FTP to transfer the 
             DBRM94_V10.xmit, DBRM94_V11.xmit, or the DBRM94_V12.xmit   
             file to your z/OS system by doing a BINARY upload into the 
             pre-allocated file created in step 1.


STEP 3: RECEIVE THE XMIT FILEs TO CREATE THE DBRMLIB PDS (required)

  Under z/OS, issue a RECEIVE command against the uploaded XMIT file as
  follows where 'sas.dbrm94.vxx.xmit' is the preallocated file in step 1. 

      receive indataset('sas.dbrm94.vx.xmit') 

  After doing this step, you will see a prompt similar to the following:

     INMR901I Dataset DATA.SET.NAME from USERID on ????????
     INMR906A Enter restore parameters or 'DELETE' or 'END' +

  At this prompt, you should enter something similar to the following in
  which sas.dbrm94.vxx.dbrmlib will the name of your newly created PDS   
  containing the DBRM member(s):

     DA('sas.dbrm94.vxx.dbrmlib')

  
This completes the download of the DBRM member(s) for SAS 9.4 under z/OS. 


NOTE: The following information should be given to the appropriate person responsible 
      for doing the DB2 bind:

   *  The name of the DBRMLIB data sets containing the SAS94 member (and the SAS94X
      member with DB2 V10 only) that were created in step 3 above. 

   *  When performing the DB2 bind, point to that DBRMLIB data set.