Installation Instructions for Hot Fix Y97002

Windows for x64


Hot fix Y97002 addresses the issue(s) in SAS Enterprise Case Management Mid-Tier 6.3_M1 on Windows for x64 as documented in the Issue(s) Addressed section of the hot fix download page:

http://ftp.sas.com/techsup/download/hotfix/HF2/Y97.html#Y97002


The hot fix downloaded, Y97002pt.zip, contains the updated files required to address the documented issues.
Do NOT extract the contents of Y97002pt.zip. The hot fix installation process will extract the contents as needed.


IMPORTANT NOTES

  1. You must have SAS Enterprise Case Management Mid-Tier 6.3_M1 installed on your system before applying this hot fix. Refer to SN-35968 for instructions on how to determine which product releases you have installed.

  2. Files delivered in this hot fix will be backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

  3. You must have Administrator Privileges on your CLIENT or SERVER machine.

  4. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix.

  5. This hot fix should be installed using the same userid who performed the initial software installation.

  6. CONFIGURATION: No automatic configuration scripting is included for this hot fix. If you have previously configured software installed, the SAS Deployment Manager may present a screen where you will see "Apply SAS Hot Fixes" and "Configure SAS Hot Fixes" options. On this screen, you must ensure that the "Configure SAS Hot Fix" option is *not* selected. If this option is automatically selected, please de-select it prior to proceeding with the SAS Deployment Manager Screens. Failure to do so could have unintended consequences when applying this hot fix.


INSTALLATION

The Y97002 hot fix for SAS Enterprise Case Management Mid-Tier 6.3_M1 will be installed using the SAS Deployment Manager. By default, the SAS Deployment Manager will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory.

After downloading Y97002pt.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

Please review the CONFIGURATION Important Note above concerning proper selection of the "Configure SAS Hot Fix" option in the SAS Deployment Manager.

The content of this hot fix is listed in the hot fix manifest.


POST-INSTALLATION INSTRUCTIONS

Update Solr deployment to add solr.PingRequestHandler

Hot fix Y97002 updates the sample solrconfig.xml file found in <SASHome>/SASEnterpriseCaseManagementMidTier/6.3/deploy/sample/Solr/scripts/prepareSolr/EntCaseMgmtCollection/. This solrconfig.xml file is normally copied to the Solr installation via the “Installing Global Search” steps in the ECM Admin Guide (Chapter 4 Post-installation Requirements and Tasks).

If you have already followed the “Installing Global Search” steps, you will need to manually update the solrconfig.xml file in your Solr installation to add the same changes to it that the hot fix made to the sample. If you followed the suggested Solr installation location in the Admin Guide, the directory where you must make changes to the solrconfig.xml file will be:

Windows: \solr-4.7.2\ecm\solr\EntCaseMgmtCollection\conf
Linux: /usr/local/solr-4.7.2/ecm/solr/EntCaseMgmtCollection/conf
Follow the manual steps below:
  1. Update the solrconfig.xml file in your Solr installation. The exact steps you need to follow depend on whether you have made any customizations to solrconfig.xml in your Solr installation.

    1. If you have not made any changes to solrconfig.xml after following the “Installing Global Search” steps: Copy the updated solrconfig.xml from the <SASHome>/SASEnterpriseCaseManagementMidTier/6.3/deploy/sample/Solr/scripts/prepareSolr/EntCaseMgmtCollection/ directory to the ecm/solr/EntCaseMgmtCollection/conf directory of the Solr installation.

    2. If you made custom changes to the solrconfig.xml file after following the “Installing Global Search” steps:

      Edit solrconfig.xml in the ecm/solr/EntCaseMgmtCollection/conf directory of the Solr installation to add the solr.PingRequestHandler:

      <!-- ping/healthcheck --> <requestHandler name="/admin/ping" class="solr.PingRequestHandler"> <lst name="invariants"> <str name="q">solrpingquery</str> </lst> <lst name="defaults"> <str name="echoParams">all</str> </lst> <!-- An optional feature of the PingRequestHandler is to configure the handler with a "healthcheckFile" which can be used to enable/disable the PingRequestHandler. relative paths are resolved against the data dir --> <!-- <str name="healthcheckFile">server-enabled.txt</str> --> </requestHandler>

      This can appear anywhere in the file between the <config> and </config> tags, as long as it is not embedded in any other tag or comment. The suggested place to put it is with the other “admin” request handlers. While the exact line numbers in your customized solrconfig.xml may be different from the line numbers below, the following is provided to help you locate the suggested location for the new lines. In the original solrconfig.xml file delivered with ECM 6.3_M1, there is a <requestHandler> tag with the name “/admin/” starting at line 937:

      <requestHandler name="/admin/" class="solr.admin.AdminHandlers"/>

      This is followed by several lines of comments, which end at line 959:

      <!-- <requestHandler name="/admin/file" class="solr.admin.ShowFileRequestHandler" > <lst name="invariants"> <str name="hidden">synonyms.txt</str> <str name="hidden">anotherfile.txt</str> </lst> </requestHandler> -->

      Add the new solr.PingRequestHandler XML stanza (above) after these comment lines, at line 961 in the original file.

    3. Follow the Admin Guide steps to restart Solr.

Re-build Web Application

In order for this step to execute correctly, the Metadata Server must be running.

1. Invoke the SAS Deployment Manager 9.4

From the SASDeploymentManager directory launch sasdm.exe.
SAS Deployment Manager is installed in the following default location:

<SASHOME>/SASDeploymentManager/9.4

2. Select a language in the Choose Language box

3. Select Rebuild Web Applications

4. Select Configuration Directory or Enter the Configuration Directory and Level that needs to be updated

5. Specify Connection Information, including the sasadm User ID and Password

6. Select SAS Enterprise Case Management Mid-Tier 6.3 as the Web Application to Rebuild

7. Verify the information on the Summary screen and select Start

8. Select Finish when the deployment is complete

This process will update the SAS Enterprise Case Management Mid-Tier 6.3 ear in

<SASCONFIGDIR>/Web/Staging
A backup of the original ear file will be placed in the directory
<SASCONFIGDIR>/Web/Staging/Backup

9. Exit the SAS Deployment Manager 9.4


Re-deploy Web Application

1. Restart all SAS sessions, daemons, spawners and servers.

2. Invoke the SAS Deployment Manager 9.4

From the SASDeploymentManager directory launch sasdm.sh.
SAS Deployment Manager is installed in the following default location:

<SASHOME>/SASDeploymentManager/9.4

3. Select a language in the Choose Language box

4. Select Deploy Web Applications

5. Select Configuration Directory or Enter the Configuration Directory and Level that needs to be updated

6. Specify Connection Information, including the sasadm User ID and Password

7. Check the Allow the application server to stop checkbox

8. Select SAS Enterprise Case Management Mid-Tier 6.3 as the Web Application to Deploy

9. Verify the information on the Summary screen and select Start

10. Select Finish and exit the SAS Deployment Manager when the deployment is complete

11 Please follow the instructions at the following link to clear your browser cache

http://java.com/en/download/help/webcache.xml


This completes the installation of hot fix Y97002 on Windows for x64.


Copyright 2016 SAS Institute Inc. All Rights Reserved.