Installation Instructions for Hot Fix S48009

Windows for x64

Hot fix S48009 addresses the issue(s) in SAS Web Server 9.4_M1 as documented in the Issue(s) Addressed section of the hot fix download page:

http://ftp.sas.com/techsup/download/hotfix/HF2/S48.html#S48009

S48009 is a "container" hot fix that contains the following "member" hot fixes which will update the software components as needed.

S44009  updates  SAS Environment Manager 2.1_M1
N48008  updates  SAS Web Server 9.4

Before applying this hot fix, follow the instructions in SAS Note 35968 to generate a SAS Deployment Registry report, then verify that the appropriate product releases are installed on your system. The release number information in the Registry report should match the 'member' release number information provided above for the software components installed on each machine in your deployment.

The hot fix downloaded, S48009pt.zip, includes the updates required for all components listed above on all applicable operating systems. To apply this hot fix on multiple machines, you can either save S48009pt.zip on each machine or save it in a network location that is accessible to all machines.

Do NOT extract the contents of S48009pt.zip. The hot fix installation process will extract the contents as needed.

SPECIAL NOTE REGARDING SECURITY VULNERABILITY

This hot fix requires that your software must already be configured prior to installation. If no configuration directory exists at the time of installation, security updates built into this hot fix will not be completed, leaving your software in a vulnerable state.

IMPORTANT NOTES

1. Special Note regarding Windows 2008, 2008R, 2012 and 2012R

   If you are running on one of the above mentioned operating systems, you will need to download and install updated VC++ libraries from Microsoft.
   Please visit https://www.microsoft.com/en-us/download/details.aspx?id=52685 to obtain these libraries.
   Failure to do so will result in SAS Web Server being unable to restart after applying this hot fix.

2. Files delivered in this hot fix will be backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

3. You must have Administrator Privileges on your CLIENT or SERVER machine.

4. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix.

5. This hot fix should be installed using the same userid who performed the initial software installation.

6. CONFIGURATION: No automatic configuration scripting is included for this hot fix. If you have previously configured software installed, the SAS Deployment Manager may present a screen where you will see "Apply SAS Hot Fixes" and "Configure SAS Hot Fixes" options. On this screen, you must ensure that the "Configure SAS Hot Fix" option is *not* selected. If this option is automatically selected, please de-select it prior to proceeding with the SAS Deployment Manager Screens. Failure to do so could have unintended consequences when applying this hot fix.

INSTALLATION

The hot fix will be applied using the SAS Deployment Manager. By default, the SAS Deployment Manager will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory.

After downloading S48009pt.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

Please review the CONFIGURATION Important Note above concerning proper selection of the "Configure SAS Hot Fix" option in the SAS Deployment Manager.

The hot fix installation process generates the log file

<!SASHOME>/InstallMisc/InstallLogs/IT_date-and-time-stamp.log

Postexec log files are created after the installation is completed and identifies the files that were added, backed up, changed and removed. These log files include the ‘member’ hot fix id in the name of the file and are also written to the <!SASHOME>/InstallMisc/InstallLogs directory. There is one postexec log for each ‘member’ hot fix applied (member hot fixes are listed at the top of these instructions).

POST-INSTALLATION INSTRUCTIONS

For each product installed, click the link to be redirected to post-installation instructions.

S44009  updates  SAS Environment Manager 2.1_M1
N48008  updates  SAS Web Server 9.4

S44009  updates  SAS Environment Manager 2.1_M1

None

N48008  updates  SAS Web Server 9.4

1. For multi-tier or clustered deployments, manually copy JAR files listed below from the node where SAS Web Server is installed to other nodes in the deployment.

   The standard locations of the JAR files on the SAS Web Server node are (note that "LevX" refers to the configuration level directory, such as Lev1):

   <SASConfig>/LevX/Web/Scripts/WebServer/lib/commons-collections.jar
   <SASConfig>/LevX/Web/Scripts/WebServer/lib/groovy-all.jar
   

   Copy these files to the same locations on the other nodes.

2. Edit <SASHOME>/SASWebServer/9.4/httpd-2.2.31.1-64/_instance/bin/httpdctl and change

   service_name="Pivotal httpd @ServerInstance@"
   to
   service_name="vFabric httpd @ServerInstance@"

3. Navigate to the <SASHOME>/SASWebServer/9.4/ directory. Delete the existing httpd-2.2 symbolic link and create a new one, for example (assuming your SASHome is in the default location):

   > makelink.exe httpd-2.2 "C:\Program Files\SASHome\SASWebServer\9.4\httpd-2.2.31.1-64"

4. If you have configured the Web Server to use the secure sockets HTTPS protocol then the following steps can be skipped. Otherwise, please complete the steps below to activate the new plugin.

   Note: You must restart all servers and web applications prior to executing the steps below:

   For more information on the proper order for starting servers, go to SAS® 9.4 Intelligence Platform: System Administration Guide, Fourth Edition and review the section entitled "Starting, Stopping and Checking the Status of Servers".

   1. Log into the SAS Environment Manager console.

   2. Select Resources -> Browse from the Resources dropdown. Then click the Servers link. A list of servers will be displayed.

   3. If there is a Web Server in the discovered server list, click its checkbox. The discovered Web Server name may look like "xxxxxxxx Pivotal Web Server 5.x WebServer" or "xxxxxxxx vFabric Web Server 5.x".

   4. Click the Delete button at the bottom of the webpage to remove this Web Server instance. Then click OK in the confirmation dialog.

   5. Select Dashboard in the webpage toolbar. If there is a Pivotal Web Server 5.5 in Auto-Discovery section, then check the resource and click the Add Into Inventory link. After you add the resource into inventory, please skip the following steps. Otherwise, complete the remaining steps to add the new Web Server to the inventory.

   6. Select Resources -> Browse again, and click the Platforms link. Then click on the machine platform where the Web Server is installed.

   7. Select New Auto-Discovery from the Tools Menu dropdown to request that a new discovery process run.

   8. On the New Auto-Discovery page, click on the Pivotal Web Server 5.5 checkbox. Then click the OK button near the bottom of the webpage.

   9. Select Dashboard in the webpage toolbar. Refresh the dashboard page repeatedly until the newly discovered Web Server appears in the webpage's Auto-Discovery section. Then check the resource and click the Add Into Inventory link.

      Note: If you cannot find the new Pivotal Web Server 5.5 resource in Resources -> Servers page after you clicked the Add Into Inventory link, login to the machine where the Pivotal Web Server 5.5 is installed, stop the Environment Manager Agent on this machine, re-name the data directory under <SASConfig>/LevX/Web/SASEnvironmentManager/agent-5.0.0-EE/ to data_backup, and then restart the Environment Manager Agent. Restarting the Agent must be done by using the hq-agent script with the ‘restart’ option. The new Pivotal Web Server 5.5 resource should appear on the Auto-Discovery section. Select and click the Add Into Inventory link to add this new resource into inventory.

CONFIGURING THIS HOT FIX ON A HORIZONTAL MID-TIER CLUSTER

For initial mid-tier cluster configuration, follow the information provide in SAS Note 59810

Additional manual steps are required to successfully configure these updates on a horizontal mid-tier cluster. See SAS Note SAS Note 60103 for further instructons.

This completes the installation of hot fix S48009 on Windows for x64.


Copyright 2017 SAS Institute Inc. All Rights Reserved.