Installation Instructions for Hot Fix M62003

HP-UX IPF


Hot fix M62003 addresses the issue(s) in SAS Model Manager 12.3_M1 as documented in the Issue(s) Addressed section of the hot fix download page:

http://ftp.sas.com/techsup/download/hotfix/HF2/M62.html#M62003


M62003 is a "container" hot fix that contains the following "member" hot fixes which will update the software components as needed.

M71004  updates  SAS Model Manager Client 12.3_M1
M60003  updates  SAS Model Manager Common Components 12.3
M70003  updates  SAS Model Manager Common JAR Files 12.3
M61003  updates  SAS Model Manager Mid-Tier 12.3_M1

See What is a container hot fix? in the Hot Fix FAQ for more information about container hot fixes.


Before applying this hot fix, follow the instructions in SAS Note 35968 to generate a SAS Deployment Registry report, then verify that the appropriate product releases are installed on your system. The release number information in the Registry report should match the 'member' release number information provided above for the software components installed on each machine in your deployment.

The hot fix downloaded, M62003pt.zip, includes the updates required for all components listed above on all applicable operating systems. To apply this hot fix on multiple machines, you can either save M62003pt.zip on each machine or save it in a network location that is accessible to all machines.

Do NOT extract the contents of M62003pt.zip. The hot fix installation process will extract the contents as needed.


IMPORTANT NOTES

  1. Files delivered in this hot fix are backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

  2. You must have Administrator Privileges on your CLIENT or SERVER machine.

  3. All currently active SAS sessions, daemons, spawners, and servers must be terminated before applying this hot fix.

  4. This hot fix should be installed using the same user ID that was used to performed the initial software installation.

  5. Before you can schedule a scoring task, you must complete the following steps:
    1. The password for your user ID must be made available to the SAS Metadata Repository using the SAS Management Console. To add or update your password, contact your SAS Model Manager administrator.
    2. The domain must be included with the user ID when you sign in to SAS Model Manager


INSTALLATION

Hot Fix M62003 must be installed on each machine where the updated components of the product, listed above, are installed. During the installation process you may see references to all operating systems for which updates are provided in the hot fix. The installation process will determine the operating system and which component(s) of SAS Model Manager 12.3_M1 require updating on the machine. See SAS Note 44810 for more details.

The hot fix will be applied using the SAS Deployment Manager (SDM). By default, the SDM will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory.

After downloading M62003pt.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User’s Guide.


The hot fix installation process generates the log file

<!SASHOME>/InstallMisc/InstallLogs/IT_date-and-time-stamp.log
for example, IT_2011-10-31-13.18.21.log. Each attempt to apply a hot fix results in the creation of a new log file giving detailed information regarding the installation process.

Postexec log files are created after the installation is completed and identifies the files that were added, backed up, changed and removed. These log files include the ‘member’ hot fix id in the name of the file and are also written to the <!SASHOME>/InstallMisc/InstallLogs directory. There is one postexec log for each ‘member’ hot fix applied (member hot fixes are listed at the top of these instructions).


The content of this hot fix is listed in the hot fix manifest.


POST-INSTALLATION INSTRUCTIONS

For each product installed, click the link to be redirected to post-installation instructions.

M71004  updates  SAS Model Manager Client 12.3_M1
M60003  updates  SAS Model Manager Common Components 12.3
M70003  updates  SAS Model Manager Common JAR Files 12.3
M61003  updates  SAS Model Manager Mid-Tier 12.3_M1


M71004  updates  SAS Model Manager Client 12.3_M1

Web Application Update

This hot fix requires steps that update the web application deployed to your application server.

The “SAS Model Manager Mid-Tier 12.3” is the web application to re-build. For more information, see the SAS® 9.4 Intelligence Platform, Middle-Tier Administration Guide, Chapter 8 Administering SAS Web Applications -> Rebuilding the SAS Web Applications.

The “SAS Model Manager Mid-Tier 12.3” is the web application to re-deploy. For more information, see the SAS® 9.4 Intelligence Platform, Middle-Tier Administration Guide, Chapter 8 Administering SAS Web Applications -> Redeploying the SAS Web Applications.


M60003  updates  SAS Model Manager Common Components 12.3

NONE


M70003  updates  SAS Model Manager Common JAR Files 12.3

NONE


M61003  updates  SAS Model Manager Mid-Tier 12.3_M1

The following instruction applies only for environments running SAS 9.4 M6 or earlier:

SAS Security Updates are applied during the initial installation of your software. In order to maintain the latest level of security offered by SAS, security updates should be applied and/or re-applied after any changes to your software, including installation of hot fixes. The current SAS Security Updates for all releases of SAS are available at http://ftp.sas.com/techsup/download/hotfix/HF2/SAS_Security_Updates.html. Please re-apply security updates in accordance with the SAS Security Updates and Hot Fixes document available on the SAS Security Updates web page.


Web Application Update

This hot fix requires steps that update the web application deployed to your application server.

The “SAS Model Manager Mid-Tier 12.3” is the web application to re-build. For more information, see the SAS® 9.4 Intelligence Platform, Middle-Tier Administration Guide, Chapter 8 Administering SAS Web Applications -> Rebuilding the SAS Web Applications.

The “SAS Model Manager Mid-Tier 12.3” is the web application to re-deploy. For more information, see the SAS® 9.4 Intelligence Platform, Middle-Tier Administration Guide, Chapter 8 Administering SAS Web Applications -> Redeploying the SAS Web Applications.


Update the Contents of the SAS Content Server

  1. Start all SAS sessions, daemons, spawners, and servers including the mid-tier Application Servers.

  2. Run the DAVTree.sh file to open the DAVTree utility program. The DAVTree.sh file is located in <CONFIGDIR>/Web/Utilities. Select File -> Open, enter the URL http://server-name:port/SASContentServer/repository/default/ModelManager/, and then click OK.

  3. Enter the user name and password for the configured SAS Administrator or SAS Model Manager Administrator.

  4. Expand the ConfigTemplates and SASCode directories.

  5. Right-click PerformanceMonitor.sas and select Edit to open it in the text editor.

  6. In a text editor, open <SASHOME>/SASModelManagerMidTier/12.3/Config/Deployment/Content/SASCode/PerformanceMonitor.sas, copy all of the contents and then paste it into the DAVTree text editor, and then click Save.

  7. Right-click checkLicenseForInDatabase.sas and select Edit to open it in the text editor.

  8. In a text editor, open <SASHOME>/SASModelManagerMidTier/12.3/Config/Deployment/Content/SASCode/checkLicenseForInDatabase.sas, copy all of the contents and then paste it into the DAVTree text editor, and then click Save.

  9. Right-click UDFDrop.sas and select Edit to open it in the text editor.

  10. In a text editor, open <SASHOME>/SASModelManagerMidTier/12.3/Config/Deployment/Content/SASCode/UDFDrop.sas, copy all of the contents and then paste it into the DAVTree text editor, and then click Save.

  11. Right-click genVarMacro.sas and select Edit to open it in the text editor.

  12. In a text editor, open <SASHOME>/SASModelManagerMidTier/12.3/Config/Deployment/Content/SASCode/genVarMacro.sas, copy all of the contents and then paste it into the DAVTree text editor, and then click Save.

  13. Restart the SAS Web Application Servers.


This completes the installation of hot fix M62003 on HP-UX IPF.