Installation Instructions for Hot Fix G77001

64-bit Enabled AIX


Hot fix G77001 addresses the issue(s) in SAS Warranty Analysis 4.31 as documented in the Issue(s) Addressed section of the hot fix download page:

http://ftp.sas.com/techsup/download/hotfix/HF2/G77.html#G77001


G77001 is a "container" hot fix that contains the following "member" hot fixes which will update the software components as indicated.

G75001  updates  SAS Warranty Analysis Client 4.31
G76001  updates  SAS Warranty Analysis Mid-Tier 4.31
G74001  updates  SAS Warranty Analysis Server 4.31

See What is a container hot fix? in the Hot Fix FAQ for more information about container hot fixes.


Before applying this hot fix, follow the instructions in SAS Note 35968 to generate a SAS Deployment Registry report, then verify that the appropriate product releases are installed on your system. The release number information in the Registry report should match the 'member' release number information provided above for the software components installed on each machine in your deployment.

The hot fix downloaded, G77001pt.zip, includes the updates required for all components listed above on all applicable operating systems. To apply this hot fix on multiple machines, you can either save G77001pt.zip on each machine or save it in a network location that is accessible to all machines.

Do NOT extract the contents of G77001pt.zip. The hot fix installation process will extract the contents as needed.


IMPORTANT NOTES

  1. Files delivered in this hot fix will be backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

  2. You must have Administrator Privileges on your CLIENT or SERVER machine.

  3. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix.

  4. This hot fix should be installed using the same userid who performed the initial software installation.


INSTALLATION

Hot Fix G77001 must be installed on each machine where the updated components of the product, listed above, are installed. During the installation process you may see references to all operating systems for which updates are provided in the hot fix. The installation process will determine the operating system and which component(s) of SAS Warranty Analysis 4.31 require updating on the machine. See SAS Note 44810 for more details.

The hot fix will be applied using the SAS Deployment Manager (SDM). By default, the SDM will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory.

After downloading G77001pt.zip, follow the instructions provided in the SAS Deployment Wizard/SAS Deployment Manager 9.3: User’s Guide; see the Applying Hot Fixes for Windows and UNIX section in Chapter 5 -- SAS Deployment Manager Tasks to complete the installation of the hot fix.


The hot fix installation process generates the log file

<!SASHOME>/InstallMisc/InstallLogs/IT_date-and-time-stamp.log
for example, IT_2011-10-31-13.18.21.log. Each attempt to apply a hot fix results in the creation of a new log file giving detailed information regarding the installation process.

Postexec log files are created after the installation is completed and identifies the files that were added, backed up, changed and removed. These log files include the ‘member’ hot fix id in the name of the file and are also written to the <!SASHOME>/InstallMisc/InstallLogs directory. There is one postexec log for each ‘member’ hot fix applied (member hot fixes are listed at the top of these instructions).


The content of this hot fix is listed in the hot fix manifest.


POST-INSTALLATION INSTRUCTIONS

For each product installed, click the link to be redirected to post-installation instructions.

G75001  updates  SAS Warranty Analysis Client 4.31
G76001  updates  SAS Warranty Analysis Mid-Tier 4.31
G74001  updates  SAS Warranty Analysis Server 4.31


G75001  updates  SAS Warranty Analysis Client 4.31

NONE


G76001  updates  SAS Warranty Analysis Mid-Tier 4.31

Web application Update

Updates to the SAS Warranty Analysis Mid-Tier 4.31 provided in this hot fix require that Web Applications be rebuilt and redeployed. If this component is installed on Unix, follow the steps below to rebuild and redeploy the web application:

Remove com.sas.app.launcher.cacheFile

1. Delete

<SASHOME>/SASVersionedJarRepository/eclipse/com.sas.app.launcher.cacheFile

Step 1: Re-build Web Applications

In order for this step to execute correctly, the Metadata Server must be running.

1.1 Invoke the SAS Deployment Manager 9.3

From the SASDeploymentManager directory launch sasdm.sh.
SAS Deployment Manager is installed in the following default location:

<SASHOME>/SASDeploymentManager/9.3

1.2 Select a language in the Choose Language box

1.3 Select Rebuild Web Applications

1.4 Select Configuration Directory or Enter the Configuration Directory and Level that needs to be updated

1.5 Specify Connection Information, including the sasadm User ID and Password

1.6 Select SAS Warranty Analysis Mid-Tier 4.31 as the Web Application to Rebuild

1.7 Verify the information on the Summary screen and select Start

1.8 Select Finish when the deployment is complete


This process will update the SAS Warranty Analysis Mid-Tier 4.31 ear in

<CONFIGDIR>\Lev1\Web\Staging.
A backup of the original ear file will be placed in the Backup directory.


Step 2: Re-deploy Web Applications

Follow the steps provided for your initial Solution deployment to re-deploy the updated ear to your web application.


G74001  updates  SAS Warranty Analysis Server 4.31

Following files were delivers in sas install area. They should be manually copied to sas config area:

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/smd/analysisoptionattributes_nls.smd
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/smd

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/swa43_migration.sql
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/swa42_migration.sql
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/swa431_hotfix.sas
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/swa431_migration.sql
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/templates/util_allocWARRUSER.sas
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install/templates

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/templates/sgTemplate_LineOverlay.sas
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install/templates

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/interactionxml/analysisSetup.xml
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/interactionxml

     From: <SASInstall>/SAS/SASFoundation/9.3/wrtyanlmva/sasmisc/install/configure/analysisoptions.csv
     To:   <SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install/configure

Update the Graphics Templates Catalog

  1. Start an interactive SAS session using the configuration file <CONFIGDIR>/Lev1/Applications/SASWarrantyAnalysis4.3/install/sasv9_swaconn.cfg to ensure that the USERTL library reference is properly assigned.

  2. Modify the path in the following code to point to your configuration directory, and modify the g_slash to run in your environment:

    Options validvarname=v7;
    %let g_swaConfigRoot = <!SASHOME>/TestSetup/SASConfig/Lev1/Applications/SASWarrantyAnalysis4.3/install;
    %let g_slash = /;

    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTagsets_GTL.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_BarChart.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_BarChart_MVA.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_BarChartOverlay.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_ControlChart.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_Dummy.sas";

    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_LineOverlay.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_ProbPlot.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_SDChart.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_SolidDashLines.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.styleTemplate_SWAStyle.sas";
    %include "&g_swaConfigRoot.&g_slash.templates&g_slash.sgTemplate_OverlayTrend.sas";

    Note: this code was excerpted from <CONFIGDIR>/Lev1/Applications/SASWarrantyAnalysis4.3/install/runinstall.sas.

  3. Run this code in your interactive SAS session, and it will update the contents of your Graphics Template Catalog.

Update the PARMSL datasets

  1. Start an interactive SAS session using the configuration file <CONFIGDIR>>\Lev1\Applications\SASWarrantyAnalysis4.3\install\sasv9_swaconn.cfg to ensure that the PARMSL library reference is properly assigned.

  2. Run "<SASConfig>/Lev1/Applications/SASWarrantyAnalysis4.3/install/swa431_hotfix.sas" code in your interactive SAS session, and it will update the PARMSL datasets.


This completes the installation of hot fix G77001 on 64-bit Enabled AIX.