Installation Instructions for Hot Fix F6R009

Linux for x64

Hot fix F6R009 addresses the issue(s) in SAS Fraud Management 6.1 as documented in the Issue(s) Addressed section of the hot fix download page:

https://tshf.sas.com/techsup/download/hotfix/HF2/F6R.html#F6R009

This hot fix requires SAS Security Updates to be installed IMMEDIATELY after applying this hot fix. Please read this entire document before beginning the hot fix installation.

If you do not complete the SAS Security Updates after installing this hot fix, SAS Fraud Management will be inoperable.

F6R009 is a "container" hot fix that contains the following "member" hot fixes which will update the software components as needed.

I8K002  updates  SAS Fraud Management Common Macros 6.1
G6C005  updates  SAS Fraud Management Data Services 6.1***
F8Y006  updates  SAS Fraud Management Decision Engine 6.1***
F6S009  updates  SAS Fraud Management Mid-Tier 6.1***
I8L003  updates  SAS Fraud Management Reporting History ETL Server Macros 6.1
I8M002  updates  SAS Fraud Management System of Record DB Maintenance Macros 6.1
F6T006  updates  SAS Fraud Management Transaction Extensions 6.1***
F8Z006  updates  SAS Fraud Transactional Analysis Engine 6.1***

*** member hot fixes that have been updated since the previously released hot fix (F6R008)

HOT FIX COMPONENT HISTORY

IMPORTANT NOTES

1. It is strongly recommended that you install hot fixes in a non-production environment and test *before* installing them in production.
2. The POST-INSTALLATION INSTRUCTION sections are *not* optional. These steps must be reviewed and performed where applicable for all hot fix installations. Any questions on these steps should be directed to support before you begin the installation.
3. This hot fix requires the installation of the SAS Security Updates after the POST-INSTALLATION steps. Failure to install the SAS Security Updates will result in the SAS Fraud Management solution being inoperable. Please refer to SAS Note 69006 for details.

PRE-INSTALLATION INSTRUCTIONS

1. Create a Deployment Registry report on each server:
   

   Before applying this hot fix, follow the instructions in SAS Note 35968 to generate a SAS Deployment Registry report on each server in your environment.

   Commands to create the report:
   1. cd <SASHome>/deploymntreg
   2. <JAVA_HOME>/bin/java -jar sas.tools.viewregistry.jar
      

   Two files are created: DeploymentRegistry.txt and DeploymentRegistry.html. Either of these files can be used to verify that the appropriate product releases are installed on your system. You can determine the current hot fix level by comparing the member hot fix numbers in the HOT FIX COMPONENT HISTORY chart above with the hot fix entries in the Deployment Registry report.

2. Backups:  Full backups are required. The backups will be needed to roll-back this hot fix installation should an issue occur.

   Backup the following on each Server:

   1. <SASHOME> directory
   2. <CONFIGDIR> directory
   3. Database(s) that will be updated by this hot fix. Review the POST-INSTALLATION INSTRUCTIONS: DATA TIER section to determine if there are database updates.

   For a detailed list of updated files, see the hot fix manifest.  NOTE: The manifest is cumulative for all hot fixes for this release.

3. Stop SAS Fraud Management Servers and Processes:
   1. Stop the OnDemand Decision Engine (ODE) server(s). Log on as the ODE user and run:
      $ cd <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/bin
      $ ./ose.sh stop
   2. Stop the Transactional Analysis Server (TAS). Log on as the TAS user and run:
      $ cd <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/analysis/bin
      $ ./tas.sh stop
   3. All batch jobs and processes running against the SAS FM databases should be stopped.
   4. All rule estimations should be stopped.
4. Stop SAS Servers:
   Stop the SAS servers using the sas.servers script located in <CONFIGDIR>/Lev1 directory:

   $ ./sas.servers stop
   

SERVER INSTALLATION

1. Important:  Install this hot fix using the same userid who performed the initial software installation.
2. Install the hot fix using the SAS Deployment Manager (SDM):
   

   Hot Fix F6R009 must be installed on each machine where the updated components of the product, listed above, are installed.

   The hot fix will be applied using the SAS Deployment Manager (SDM). By default, the SDM will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory. Do NOT extract the contents of   F6R009pt.zip into the selected directory. The hot fix installation process will extract the contents as needed.

   After copying F6R009pt.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

   For example:

   1. Set the DISPLAY environment variable, for example

      $ export DISPLAY=<displayname>:0

   2. From the SASDeploymentManager directory execute sasdm.sh

      $ cd <SASHOME>/SASDeploymentManager/9.4
      $ ./sasdm.sh

      Important: The SAS Deployment Manager will present a screen with two options: "Apply SAS hot fix" and "Configure SAS hot fix" On this screen, you must ensure that the "Configure SAS hot fix" option is *not* selected before continuing.

   Notes:

   • If this hot fix has been previously installed, use the -reinstallhotfix option:

     $ ./sasdm.sh -reinstallhotfix

   • If friendly fixes have been previously installed or if manual file updates have been made in <SASHOME>, use the -alwaysoverwrite option to ensure that those files are overwritten by the SDM:

     $ ./sasdm.sh -alwaysoverwrite

   The hot fix installation process generates a log whose name matches this pattern:

   <SASHOME>/InstallMisc/InstallLogs/IT_date-and-time-stamp.log

   An example file name is: IT_2021-05-28-11.00.31.log. Each attempt to apply a hot fix results in the creation of a new log file giving detailed information regarding the installation process.

   For each member hot fix, additional logs are written to the <SASHOME>/InstallMisc/InstallLogs directory. The logs whose names end with "_Install_postexec.log" identify the files that were added, backed up, changed and removed by the installation of that member hot fix.

POST-INSTALLATION INSTRUCTIONS: SERVER TIER

This section describes custom steps that depend on the starting version of your system before this hot fix was installed. Locate your starting version in the first column of the table below and perform only those steps listed in the second column for that version.

Starting Version	Steps
6.1M0 (No Hot Fix) or 6.1M0 HF1 or 6.1M0 HF2 or 6.1M0 HF3	Steps for upgrade from base 6.1M0, HF1, HF2, HF3 to HF9 Update ODE Server Configuration Files IMPORTANT: If you have customized any of the files copied in this step, you must merge your updates into the new versions. On each ODE Server: Back up the actions.xml, database.xml, ose.xml, post-score-actions.xml files in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/etc directory. Copy or merge these files: actions.xml database.xml ose.xml post-score-actions.xml From: <SASHOME>/SASFraudManagementDecisionEngine/6.1/Config/etc To:   <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/etc Update ODE Server Script Files IMPORTANT: If you have customized any of the files copied in this step, you must merge your updates into the new versions. On each ODE Server: Back up the msgapi_pb2.py and ose.py files in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/bin directory. Copy or merge these files: msgapi_pb2.py ose.py From: <SASHOME>/SASFraudManagementDecisionEngine/6.1/Config/bin To:   <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/bin Update ODE Server Property File: On each ODE Server: Backup the ose.properties file in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/etc directory. Edit the ose.properties file to change all occurrences of: WHITE_LIST To: ACCEPT_LIST (PostgreSQL only) Update batch environment file Back up the sasfraud_env.sh file in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/batch/common/etc/ directory. Edit sasfraud_env.sh to make the following change: Locate the 6 lines similar to below. The path may be different in your file. export PATH=/usr/pgsql-11/bin:$PATH if [ "$MACHINE_TYPE" = "lax" ]; then export LD_LIBRARY_PATH=/usr/pgsql-11/lib:$LD_LIBRARY_PATH else export LIBPATH=/usr/pgsql-11/lib:$LIBPATH fi Copy the 6 lines from your file and paste them after this section of code: if [ $sordbtype = postgres ] then export SOR_PATH_PG="database=sor6 port=<your-db-port> server=\"<your-db-server>\"" export TDR_PATH_PG="database=tdr6 port=<your-db-port> server=\"<your-db-server>\"" export MEH_PATH_PG="database=meh6 port=<your-db-port> server=\"<your-db-server>\""
6.1M0 HF4 or 6.1M0 HF5	Steps for upgrade from HF4, HF5 to HF9 Update ODE Server Configuration Files IMPORTANT: If you have customized any of the files copied in this step, you must merge your updates into the new versions. On each ODE Server: Back up the ose.xml and post-score-actions.xml files in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/etc directory. Copy or merge these files: ose.xml post-score-actions.xml From: <SASHOME>/SASFraudManagementDecisionEngine/6.1/Config/etc To:   <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/etc Update ODE Server Script Files IMPORTANT: If you have customized any of the files copied in this step, you must merge your updates into the new versions. On each ODE Server: Back up the ose.py file in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/bin directory. Copy or merge this file: ose.py From: <SASHOME>/SASFraudManagementDecisionEngine/6.1/Config/bin To:   <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/bin Update ODE Server Property File: On each ODE Server: Backup the ose.properties file in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>/etc directory. Edit the ose.properties file to change all occurrences of: WHITE_LIST To: ACCEPT_LIST
6.1M0 HF6 or 6.1M0 HF7 or 6.1M0 HF8	Steps for upgrade from 6.1M0 HF6, HF7, HF8 to HF9 There are no custom steps for the server tier to upgrade from 6.1M0 HF6, HF7 or HF8 to 6.1M0 HF9.

POST-INSTALLATION INSTRUCTIONS: DATA TIER

1. Execute SAS Fraud Management DBMS Package to Update the Databases
   1. The following table describes the database changes for each hot fix. The DBMS script for each database will examine the current state of the database and apply the required changes for the all previous hot fixes and the current hot fix.

      Vendor	Database	Hot fix	Updates
      PostgreSQL	MEH	HF1	Authorizations are added to the static partition tables.
      Oracle	TDR	HF1	Peformance improvements are made to the DECODE_BASE64_SIGNATURE function.
      Oracle	SOR	HF4	Delete fmx_me_phone entry, loaded by default that is a space.
      PostgreSQL	SOR	HF4	- Support for SAMS for PostgreSQL. - Delete fmx_me_phone entry, loaded by default that is a space.
      PostgreSQL	TDR	HF4	Support for SAMS for PostgreSQL.
      PostgreSQL DB2 Oracle	SOR	HF6	Support for 6000 rule slots.
      PostgreSQL DB2 Oracle	TDR	HF6	Support for 6000 rule slots.
      PostgreSQL DB2 Oracle	SOR	HF8	- Add new properties to the FCM_PROPERTY table lookup_list_invalid_character_messages rule_test_day_duration rule_test_transaction_limit webapp.done.typing.interval webapp.enable.autocompleter webapp.show.rule.syntax.button - Update the ACTION_NAME and ACTION_DESC values for ACTION_ID=50143 in the FCM_ACTION table. - Update the FCM_FIELD_DEFINITION table to set size related information for the srp_rule_overtime field name. - Update the FCM_GSU_VW view.
      DB2	SOR	HF8	- Update the FCM_FIELD_DEFINITION table to set DBMS_VARIABLE_TYPE value to DECIMAL(19,5) where it is BINARY_DOUBLE.
      PostgreSQL	SOR	HF9	- Update the FCM_LOOKUP_LIST_DEFINITION table to change the KEY_COLUMNS data type from VARCHAR(4000) to Text.
      DB2 Oracle	SOR	HF9	- Update the FCM_LOOKUP_LIST_DEFINITION table to change the KEY_COLUMNS data type from VARCHAR(4000) to CLOB.
      PostgreSQL DB2 Oracle	SOR	HF9	- Update the FCM_PRIVILEGE table to add "Approve and Promote Rules" and "Approve and Delete Rules" privileges.

   2. As the SAS installation user, log on to the server where the SAS Fraud Management Data Services component is installed.
   3. Change to the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/dbms/bin directory.
   4. (Optional) To preview the SQL for the changes that will be applied to each database, run the following commands:

      $ ./mehddl.sh preview
      $ ./sorddl.sh preview
      $ ./tdrddl.sh preview

   5. Run the database update scripts. Check each log for errors. By default, the logs are in <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/dbms/logs directory.

      $ ./mehddl.sh update
      $ ./sorddl.sh update
      $ ./tdrddl.sh update

      Notes:
      • You can run all three <db>ddl.sh scripts whether there are database changes or not. The DBMS package will determine what updates are needed and skip the rest.
      • If a script fails with a checksum error, clear the checksums for the failed database followed by the update command:

        $ ./mehddl.sh clearCheckSums
        $ ./mehddl.sh update
        
        $ ./sorddl.sh clearCheckSums
        $ ./sorddl.sh update
        
        $ ./tdrddl.sh clearCheckSums
        $ ./tdrddl.sh update

      • You can update the logging level and log file location the database properties files located in the <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/dbms/etc directory.

INSTALL SAS SECURITY UPDATES

This hot fix requires the installation of the SAS Security Updates. Please refer to SAS Note 69006 for details.
Notes:
• All web applications must be rebuilt and redeployed after the SAS Security Updates are installed. A link to the security update instructions is on the download page: SAS Security Updates and Hot Fixes.
• On SAS 9.4 M6, if you reinstall this hot fix after the SAS Security Updates are installed, you must reinstall the SAS Security Updates.
• On SAS 9.4 M7, reinstalling this hot fix does not require SAS Security Updates to be reinstalled.

Failure to install the SAS Security Updates will result in the SAS Fraud Management solution being inoperable.

RESTART SAS SERVERS

Restart the SAS servers using the sas.servers script located in <CONFIGDIR>/Lev1 directory:

$ ./sas.servers stop
$ ./sas.servers start

START SAS Fraud Management

1. Redeploy Rules Files in SAS Fraud Management Web Application:

   Log in to the web application as a user with the privilege to deploy rules on the Console tab. Deploy all the existing rules files.

   Note: After a hot fix install, all users may need to clear their web browser cache before running the web application.

2. Start SAS Fraud Management Servers:
   1. Start the TAS server. Log on as the TAS user and run:
      $ cd <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/analysis/bin
      $ ./tas.sh start

   Confirm there are no errors in the log.

   2. Start the ODE server(s). Log on as the ODE user and run:
      $ cd <CONFIGDIR>/Lev1/Applications/SASFraudManagement/6.1/<Auth-Domain>/engine/Server<n>bin
      $ ./ose.sh start

   Confirm there are no errors in the log.

   3. Start any batch jobs that were stopped before the installation.
3. Create a final Deployment Registry report on each server:
   

   Run a new SAS Deployment Registry report following the same steps as in the PRE-INSTALLATION INSTRUCTIONS. The new report files will overwrite the existing ones. To retain the old files, save them to a new location or rename them before running the commands.

   Please send a copy of the final DeploymentRegistry.txt file to SAS Fraud Management support.

ADDITIONAL INSTRUCTIONS: SAS Business Orchestration Services (BOSS) Servers

If SAS Business Orchestration Services (BOSS) is used to send transactions to the SAS OnDemand Decision Engine, then three JAR files must match between the OnDemand Decision Engine and the BOSS installation.


The three JAR files are:

• sas.finance.fraud.engine.jar
• sas.finance.fraud.transaction.jar
• sas.finserv.creditfraud.common.jar

If these jars have been updated by this hot fix or any hot fix since your starting hot fix level, they must be copied into the 'lib' subdirectory of the BOSS installation directory. For additional details see SAS Note 68969.

Important: Save a backup copy of the jars from the BOSS directory before replacing them.