INSTALLATION INSTRUCTIONS FOR HOT FIX E9OC13 LINUX FOR ITANIUM FIX INFORMATION: The hot fix E9OC13 addresses the issue(s) in SAS 9.1.3 (9.1 TS1M3) of SAS/ACCESS Interface to ORACLE software on Linux for Itanium as documented in the "Issue(s) Addressed" section of the hot fix download page: http://ftp.sas.com/techsup/download/hotfix/e9_dbcs_prod_list.html#e9oc13 IMPORTANT NOTE(S): 1. You must have SAS 9.1.3 (9.1 TS1M3) and SAS 9.1.3 Service Pack 4 installed on your system before applying this hot fix. 2. You must have Administrator Privileges on your CLIENT or SERVER machine. 3. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix. 4. During hot fix installation files are extracted to /tmp. Be sure to check the space requirement on the download page to verify that sufficient space is available before initiating the download. 5. When applying multiple hot fixes at one time (See Step 6, Option 1) it is important that the directory specified contains only 9.1.3 hot fix files. Files other than 9.1.3 hot fixes will generate errors during the installation process. 6. Hot fixes should be installed under the same user account that performed the original SAS installation. FILE INFORMATION: The hot fix package that is downloaded is in tar format. The name of the tar file is e9oc13li.tar, and it contains the following updated files: * sasioora.e9oc13 the replacement executable containing the hot fix * sasioora a link to sasioora.e9oc13 * sasoradb.e9oc13 the replacement executable containing the hot fix * sasoradb a link to sasoradb.e9oc13 * sasoraac.e9oc13 the replacement executable containing the hot fix * sasoraac a link to sasoraac.e9oc13 * sasalora.e9oc13 the replacement executable containing the hot fix * sasalora a link to sasalora.e9oc13 * sasdblp2.e9oc13 the replacement executable containing the hot fix * sasdblp2 a link to sasdblp2.e9oc13 * sasdbld2.e9oc13 the replacement executable containing the hot fix * sasdbld2 a link to sasdbld2.e9oc13 * dbiora.msg.e9oc13 the replacement message file containing the hot fix * dbiora.msg a link to dbiora.msg.e9oc13 * orlix10.e9oc13 the replacement executable containing the hot fix * orlix10 a link to orlix10.e9oc13 * orlix900.e9oc13 the replacement executable containing the hot fix * orlix900 a link to orlix900.e9oc13 * e9oc13li.aud a hot fix identifier file that will allow Technical Support to determine which fixes have been applied to a system * e9oc13li.txt a copy of these installation instructions; this file is installed in !SASROOT/hotfix/doc INSTALLATION STEPS: In these instructions, the directory where SAS 9.1.3 (9.1 TS1M3) is installed is: /usr/lib/sas913 Step 1: Download the hot fix or group of hot fixes that are to be installed to a directory accessible to the SAS Setup. Note: You must NOT extract the contents of the downloaded tar file(s) before proceeding to Step 2. Step 2: Login as the same userid that installed SAS and invoke the SAS Setup $ cd /usr/lib/sas913 $ ./sassetup Step 3: From the Primary Menu select Run Setup Utilities Primary Menu ------------ 1. Update an Existing Installation * 2. Run Setup Utilities ------------------------------- g: Go back q: Quit h: Help ------------------------------- Action? (1) 2 Step 4: From the Setup Utilities Menu select Run Technical Support Tools Setup Utilities Menu -------------------- 1. Renew SAS Software 2. Perform SAS Software Configuration 3. Perform Product-Specific Configuration * 4. Run Technical Support Tools 5. List Previously Installed Software ------------------------------- g: Go back q: Quit h: Help ------------------------------- Action? (1) 4 Step 5: From the Technical Support Tools Menu select Install applicable hotfixes Technical Support Tools Menu ---------------------------- 1. Check this computer against SAS system requirements 2. List installed operating system components/patches * 3. Install applicable hotfixes 4. List all installed hotfixes ------------------------------- g: Go back q: Quit h: Help ------------------------------- Action? (1) 3 Step 6: Specify the location of the hot fix(es) to be installed. Option 1: Apply multiple hot fixes at one time: Enter the full directory path that contains all of the hot fixes that are to be installed. All hot fixes in the directory specified will be installed EXCEPT for hot fixes that have been previously applied. Hot fixes in this directory that have been previously applied will NOT be reapplied. IMPORTANT: This directory should not contain any files other than 9.1.3 hot fixes. Files other than 9.1.3 hot fixes will generate errors during the installation process. Option 2: Apply one hot fix at a time: Specify the full path and filename for the single hot fix that is to be installed. (Optional) Step 7: From the Technical Support Tools Menu select List all installed hotfixes Technical Support Tools Menu ---------------------------- 1. Run Revcheck tool to check system settings 2. Install applicable hotfixes * 3. List all installed hotfixes ------------------------------- g: Go back q: Quit h: Help ------------------------------- Action? (3) 3 Step 8: Re-link the sasora executable for the appropriate Oracle client: If running Oracle 10 client: Assuming !SASROOT is /usr/lib/sas913, execute the following commands: > cd /usr/lib/sas913/hotfix/sasexe > mv sasora sasora.bak (if sasora exists) > ln -s orlix10 sasora If running Oracle 9 client: Assuming !SASROOT is /usr/lib/sas913, execute the following commands: > cd /usr/lib/sas913/hotfix/sasexe > mv sasora sasora.bak (if sasora exists) > ln -s orlix900 sasora All configuration file updates and utility configurations are handled by the installation. This completes the installation of hot fix E9OC13 on Linux for Itanium.