INSTALLATION INSTRUCTIONS FOR HOT FIX E9BD14

SOLARIS 64BIT



FIX INFORMATION:

The hot fix E9BD14 addresses the issue(s) in SAS 9.1.3 (9.1 TS1M3) 
of Base SAS software on Solaris 64bit as documented in the
"Issue(s) Addressed" section of the hot fix download page:

http://ftp.sas.com/techsup/download/hotfix/e9_dbcs_prod_list.html#e9bd14



IMPORTANT NOTE(S):

1.  You must have SAS 9.1.3 (9.1 TS1M3) and SAS 9.1.3 Service Pack 4
    installed on your system before applying this hot fix.
    
2.  You must have Administrator Privileges on your CLIENT or SERVER machine.
    
3.  All currently active SAS sessions, daemons, spawners and servers must 
    be terminated before applying this hot fix.

4.  During hot fix installation files are extracted to /tmp.  Be
    sure to check the space requirement on the download page to
    verify that sufficient space is available before initiating
    the download.

5.  When applying multiple hot fixes at one time (See Step 6, Option 1)
    it is important that the directory specified contains only 9.1.3 hot
    fix files.  Files other than 9.1.3 hot fixes will generate errors
    during the installation process.

6.  Hot fixes should be installed under the same user account that performed 
    the original SAS installation.



FILE INFORMATION:

The hot fix package that is downloaded is in tar format.  The name of the 
tar file is e9bd14s6.tar, and it contains the following updated files:

      * sasxdbi.e9bd14
             the replacement executable containing the hot fix

      * sasxdbi
             a link to sasxdbi.e9bd14

      * e9bd14s6.aud
             a hot fix identifier file that will allow Technical Support
             to determine which fixes have been applied to a system

      * e9bd14s6.txt
             a copy of these installation instructions; this file is installed
             in !SASROOT/hotfix/doc 



INSTALLATION STEPS:

In these instructions, the directory where SAS 9.1.3 (9.1 TS1M3) is installed is:

       /usr/lib/sas913


Step 1:  Download the hot fix or group of hot fixes that are to be installed to a 
         directory accessible to the SAS Setup. 
         
         Note:  You must NOT extract the contents of the downloaded tar file(s) 
                before proceeding to Step 2.		
	 
	 
Step 2:  Login as the same userid that installed SAS and invoke the SAS Setup

         $ cd  /usr/lib/sas913
         $ ./sassetup


Step 3:  From the Primary Menu select Run Setup Utilities

         Primary Menu
         ------------
           1.  Update an Existing Installation
         * 2.  Run Setup Utilities
           -------------------------------
           g: Go back   q: Quit    h: Help
           -------------------------------
           Action? (1) 2


Step 4:  From the Setup Utilities Menu select Run Technical Support Tools

         Setup Utilities Menu
         --------------------
           1.  Renew SAS Software
           2.  Perform SAS Software Configuration
           3.  Perform Product-Specific Configuration
         * 4.  Run Technical Support Tools
           5.  List Previously Installed Software
           -------------------------------
           g: Go back   q: Quit    h: Help
           -------------------------------
           Action? (1) 4


Step 5:  From the Technical Support Tools Menu select Install applicable
         hotfixes

         Technical Support Tools Menu
         ----------------------------
           1.  Check this computer against SAS system requirements
           2.  List installed operating system components/patches
         * 3.  Install applicable hotfixes
           4.  List all installed hotfixes
           -------------------------------
           g: Go back   q: Quit    h: Help
           -------------------------------
           Action? (1) 3


Step 6:  Specify the location of the hot fix(es) to be installed.

         Option 1:  Apply multiple hot fixes at one time:

         Enter the full directory path that contains all of the hot fixes
         that are to be installed.  All hot fixes in the directory specified
         will be installed EXCEPT for hot fixes that have been previously
         applied.  Hot fixes in this directory that have been previously
         applied will NOT be reapplied.

         IMPORTANT:  This directory should not contain any files other than
                     9.1.3 hot fixes.  Files other than 9.1.3 hot fixes will
                     generate errors during the installation process.

         Option 2:  Apply one hot fix at a time:

         Specify the full path and filename for the single hot fix that is
         to be installed.


(Optional)
Step 7:  From the Technical Support Tools Menu select List all installed hotfixes

         Technical Support Tools Menu
         ----------------------------
           1.  Run Revcheck tool to check system settings
           2.  Install applicable hotfixes
         * 3.  List all installed hotfixes
         -------------------------------
         g: Go back   q: Quit    h: Help
         -------------------------------
         Action? (3) 3



All configuration file updates and utility configurations are handled by the 
installation.


This completes the installation of hot fix E9BD14 on Solaris 64bit.